Make ESP32CAM Projects Folder

ESP32CAM_Projects/ESP32_CAM_LocalServer/CameraWeb/CameraWeb.ino

@@ -0,0 +1,109 @@
+#include "esp_camera.h"
+#include <WiFi.h>
+#include <ArduinoWebsockets.h>
+
+//
+// WARNING!!! Make sure that you have either selected ESP32 Wrover Module,
+//            or another board which has PSRAM enabled
+//
+
+// Select camera model
+//#define CAMERA_MODEL_WROVER_KIT
+//#define CAMERA_MODEL_ESP_EYE
+//#define CAMERA_MODEL_M5STACK_PSRAM
+//#define CAMERA_MODEL_M5STACK_WIDE
+#define CAMERA_MODEL_AI_THINKER
+
+#include "camera_pins.h"
+
+const char* ssid = "ThatProject";
+const char* password = "california";
+const char* websocket_server_host = "192.168.1.220";
+const uint16_t websocket_server_port = 8888;
+
+using namespace websockets;
+WebsocketsClient client;
+
+void setup() {
+  Serial.begin(115200);
+  Serial.setDebugOutput(true);
+  Serial.println();
+
+  camera_config_t config;
+  config.ledc_channel = LEDC_CHANNEL_0;
+  config.ledc_timer = LEDC_TIMER_0;
+  config.pin_d0 = Y2_GPIO_NUM;
+  config.pin_d1 = Y3_GPIO_NUM;
+  config.pin_d2 = Y4_GPIO_NUM;
+  config.pin_d3 = Y5_GPIO_NUM;
+  config.pin_d4 = Y6_GPIO_NUM;
+  config.pin_d5 = Y7_GPIO_NUM;
+  config.pin_d6 = Y8_GPIO_NUM;
+  config.pin_d7 = Y9_GPIO_NUM;
+  config.pin_xclk = XCLK_GPIO_NUM;
+  config.pin_pclk = PCLK_GPIO_NUM;
+  config.pin_vsync = VSYNC_GPIO_NUM;
+  config.pin_href = HREF_GPIO_NUM;
+  config.pin_sscb_sda = SIOD_GPIO_NUM;
+  config.pin_sscb_scl = SIOC_GPIO_NUM;
+  config.pin_pwdn = PWDN_GPIO_NUM;
+  config.pin_reset = RESET_GPIO_NUM;
+  config.xclk_freq_hz = 10000000;
+  config.pixel_format = PIXFORMAT_JPEG;
+  //init with high specs to pre-allocate larger buffers
+  if(psramFound()){
+    config.frame_size = FRAMESIZE_VGA;
+    config.jpeg_quality = 40;
+    config.fb_count = 2;
+  } else {
+    config.frame_size = FRAMESIZE_SVGA;
+    config.jpeg_quality = 12;
+    config.fb_count = 1;
+  }
+
+
+  // camera init
+  esp_err_t err = esp_camera_init(&config);
+  if (err != ESP_OK) {
+    Serial.printf("Camera init failed with error 0x%x", err);
+    return;
+  }
+
+ 
+
+  WiFi.begin(ssid, password);
+
+  while (WiFi.status() != WL_CONNECTED) {
+    delay(500);
+    Serial.print(".");
+  }
+  Serial.println("");
+  Serial.println("WiFi connected");
+
+  Serial.print("Camera Ready! Use 'http://");
+  Serial.print(WiFi.localIP());
+  Serial.println("' to connect");
+
+  while(!client.connect(websocket_server_host, websocket_server_port, "/")){
+    delay(500);
+    Serial.print(".");
+  }
+  Serial.println("Websocket Connected!");
+}
+
+void loop() {
+  camera_fb_t *fb = esp_camera_fb_get();
+  if(!fb){
+    Serial.println("Camera capture failed");
+    esp_camera_fb_return(fb);
+    return;
+  }
+
+  if(fb->format != PIXFORMAT_JPEG){
+    Serial.println("Non-JPEG data not implemented");
+    return;
+  }
+
+  client.sendBinary((const char*) fb->buf, fb->len);
+  esp_camera_fb_return(fb);
+}