hardware PCB v1.0

2026-01-12 09:17:41 +03:00 · 2021-04-14 14:03:33 +03:00
parent 468d299e9e
commit 23626a37d1
11 changed files with 2 additions and 4 deletions
--- a/README.md
+++ b/README.md
@@ -49,13 +49,11 @@ Converter file located [here](./converters/DIY_Zintercom.js)
 Support `router` and `end device` modes.  
 Install `E18-MS1PA1`, `E18-MS1PA2` or `E18-MS1-PCB`.  
 <img src="./images/front_side.png" width="70%">
-<img src="./images/back_DC_5-9V.png" width="35%">
-<img src="./images/back_microUSB.png" width="35%">
+<img src="./images/back_DC_5-9V.png" width="70%">


 ### Battery Power  

 Support only `end device` mode.  
 Install `E18-MS1-PCB` only!  
-<img src="./images/back_2xAAA.png" width="35%">
-<img src="./images/back_CR2032.png" width="35%">
+<img src="./images/back_2xAAA.png" width="70%">
--- a/hardware/BOM_Zintercom.csv
+++ b/hardware/BOM_Zintercom.csv
--- a/hardware/Gerber_Zintercom.zip
+++ b/hardware/Gerber_Zintercom.zip
--- a/hardware/Schematic_Zintercom.png
+++ b/hardware/Schematic_Zintercom.png
--- a/images/back_2xAAA.png
+++ b/images/back_2xAAA.png
--- a/images/back_CR2032.png
+++ b/images/back_CR2032.png
--- a/images/back_DC_5-9V.png
+++ b/images/back_DC_5-9V.png
--- a/images/back_microUSB.png
+++ b/images/back_microUSB.png
--- a/images/dimensions.png
+++ b/images/dimensions.png
--- a/images/front_side.png
+++ b/images/front_side.png
--- a/images/z2m.png
+++ b/images/z2m.png