rad/Zintercom
1
0
Fork 0
mirror of https://github.com/Utyff/Zintercom.git synced 2026-01-12 09:17:41 +03:00
Code Issues Projects Releases Wiki Activity

updated readme battery mode part

Browse Source 
updated external converter
updated some images
This commit is contained in:
lost
2021-04-15 18:01:05 +03:00
parent 23626a37d1
commit 2b89cbc188
5 changed files with 44 additions and 65 deletions
Download Patch File Download Diff File Expand all files Collapse all files

51
README.md
View File

@@ -1,17 +1,17 @@
# Zintercom
## Zigbee Intercom Automator
This device is designed to control the matrix intercom using Zigbee
##### Zigbee Intercom Automator
This device is designed to control the matrix intercom using Zigbee.
Using zigbee2mqtt you can:
1. Receive notification when the intercom rings. (also support **direct bind**)
2. Mute the sound on the intercom handset.
3. Automatically or manually open the door or hang up when the intercom rings.
3. Automatically or manually open the door or hang up when the intercom rings.
There are 4 work modes:
Never - ordinary work mode, use handset to control
Once - one time open door when intercom rings
Always - open door when intercom rings
Drop - hangs up all intercom rings, right after start
1. `Never` - ordinary work mode, use handset to control
2. `Once` - one time open door when intercom rings
3. `Always` - open door when intercom rings
4. `Drop` - hangs up all intercom rings, right after start
You can change the operating mode with z2m or by pressing the button.
After pressing the button, the LED will flash.
@@ -23,15 +23,14 @@ Reset to FN by press and hold BTN for 5 seconds.
LED will flash during reset.
<img src="./images/z2m_dashboard.gif" width="45%">
### How to add device into zigbe2mqtt
Use [external converters](https://www.zigbee2mqtt.io/information/configuration.html#external-converters-configuration) feature
Converter file located [here](./converters/DIY_Zintercom.js)
<img src="./images/z2m_dashboard.png" width="45%">
<img src="./images/z2m_exposes.png" width="90%">
<img src="./images/z2m_exposes.png" width="90%">
### Schematic
@@ -47,8 +46,10 @@ Converter file located [here](./converters/DIY_Zintercom.js)
### DC Power
Support `router` and `end device` modes.
Install `E18-MS1PA1`, `E18-MS1PA2` or `E18-MS1-PCB`.
<img src="./images/front_side.png" width="70%">
Install `E18-MS1PA1`, `E18-MS1PA2` or `E18-MS1-PCB`.
<img src="./images/front_side.png" width="70%">
<img src="./images/back_DC_5-9V.png" width="70%">
@@ -56,4 +57,30 @@ Install `E18-MS1PA1`, `E18-MS1PA2` or `E18-MS1-PCB`.
Support only `end device` mode.
Install `E18-MS1-PCB` only!
Do not turn off `sound` because it turns U2 forever, which will drain the battery much faster.
Since the device is in sleep mode, it cannot receive commands.
But you have the ability to set the button mode or at the time of the call.
If any commands are in the coordinator's queue, they will be executed after a button is pressed or a call is received.
<img src="./images/back_2xAAA.png" width="70%">
##### The mode set by the Zigbee command `overwrites` the mode set by the button.
### Binding
The device supports direct binding of an incoming call to the onOff cluster.
For example, you can turn on the light while a call comes to the intercom, for notification in mute mode.
### Files to reproduce
* [Gerbers and BOM](https://github.com/diyruz/Zintercom/tree/master/hardware) by [xyzroe](https://t.me/xyzroe)
* [Firmware](https://github.com/diyruz/Zintercom/releases) by [xyzroe](https://t.me/xyzroe)
### Inspired by
The original scheme of the intercom opener by [Alexander Vaidurov](https://easyeda.com/Alex_AW/domofon-with-battery)
Various hardware solutions by [Jager](https://modkam.ru)
Firmware for different Zigbee devices by [Anonymous](https://github.com/nurikk/)