updated readme battery mode part

updated external converter
updated some images

README.md

@@ -1,6 +1,6 @@
 # Zintercom  
-## Zigbee Intercom Automator
-This device is designed to control the matrix intercom using Zigbee
+##### Zigbee Intercom Automator  
+This device is designed to control the matrix intercom using Zigbee.
 
 Using zigbee2mqtt you can:
 1. Receive notification when the intercom rings. (also support **direct bind**)
@@ -8,10 +8,10 @@ Using zigbee2mqtt you can:
 3. Automatically or manually open the door or hang up when the intercom rings.
 
 There are 4 work modes:  
-Never - ordinary work mode, use handset to control  
-Once - one time open door when intercom rings  
-Always - open door when intercom rings  
-Drop - hangs up all intercom rings, right after start  
+1. `Never` - ordinary work mode, use handset to control  
+2. `Once` - one time open door when intercom rings  
+3. `Always` - open door when intercom rings  
+4. `Drop` - hangs up all intercom rings, right after start  
 
 You can change the operating mode with z2m or by pressing the button.  
 After pressing the button, the LED will flash.  
@@ -23,14 +23,13 @@ Reset to FN by press and hold BTN for 5 seconds.
 
 LED will flash during reset.  
 
+<img src="./images/z2m_dashboard.gif" width="45%">     
 
 ### How to add device into zigbe2mqtt
 Use [external converters](https://www.zigbee2mqtt.io/information/configuration.html#external-converters-configuration) feature
 
 Converter file located [here](./converters/DIY_Zintercom.js)  
 
-<img src="./images/z2m_dashboard.png" width="45%">
-
 <img src="./images/z2m_exposes.png" width="90%">  
 
 ### Schematic
@@ -48,7 +47,9 @@ Converter file located [here](./converters/DIY_Zintercom.js)
 
 Support `router` and `end device` modes.  
 Install `E18-MS1PA1`, `E18-MS1PA2` or `E18-MS1-PCB`.   
+
 <img src="./images/front_side.png" width="70%">  
+
 <img src="./images/back_DC_5-9V.png" width="70%">
 
 
@@ -56,4 +57,30 @@ Install `E18-MS1PA1`, `E18-MS1PA2` or `E18-MS1-PCB`.
 
 Support only `end device` mode.  
 Install `E18-MS1-PCB` only!  
+
+Do not turn off `sound` because it turns U2 forever, which will drain the battery much faster.
+
+Since the device is in sleep mode, it cannot receive commands.  
+But you have the ability to set the button mode or at the time of the call.  
+
+If any commands are in the coordinator's queue, they will be executed after a button is pressed or a call is received.
+
 <img src="./images/back_2xAAA.png" width="70%">
+
+##### The mode set by the Zigbee command `overwrites` the mode set by the button.
+
+### Binding
+The device supports direct binding of an incoming call to the onOff cluster.  
+
+For example, you can turn on the light while a call comes to the intercom, for notification in mute mode.
+
+
+### Files to reproduce
+* [Gerbers and BOM](https://github.com/diyruz/Zintercom/tree/master/hardware) by [xyzroe](https://t.me/xyzroe)  
+* [Firmware](https://github.com/diyruz/Zintercom/releases) by [xyzroe](https://t.me/xyzroe)  
+
+
+### Inspired by
+The original scheme of the intercom opener by [Alexander Vaidurov](https://easyeda.com/Alex_AW/domofon-with-battery)  
+Various hardware solutions by [Jager](https://modkam.ru)  
+Firmware for different Zigbee devices by [Anonymous](https://github.com/nurikk/)  

converters/DIYRuZ_Zintercom.js

@@ -7,11 +7,6 @@ const {
 const ep = exposes.presets;
 const ea = exposes.access;
 
-const ZCL_DATATYPE_INT16 = 0x29;
-const ZCL_DATATYPE_UINT8 = 0x20;
-const ZCL_DATATYPE_UINT16 = 0x21;
-const ZCL_DATATYPE_BOOLEAN = 0x10;
-const ZCL_DATATYPE_INT32 = 0x2b;
 const bind = async (endpoint, target, clusters) => {
     for (const cluster of clusters) {
         await endpoint.bind(cluster, target);
@@ -63,8 +58,6 @@ const repInterval = {
     MINUTE: 60,
 };
 
-
-
 const fz = {
   diy_zintercom_config: {
       cluster: 'closuresDoorLock',
@@ -150,11 +143,10 @@ const tz = {
 
 const device = {
     zigbeeModel: ['DIY_Zintercom'],
-    model: 'DIY_Zintercom',
-    vendor: 'xyzroe',
-    description: '[Intercom Auto Opener]',
-    supports: '',
-    //homeassistant: [hass.temperature, hass.presure, hass.humidity, hass.co2],
+    model: 'DIYRuZ_Zintercom',
+    vendor: 'DIYRuZ',
+    description: '[Matrix intercom auto opener](https://diyruz.github.io/posts/zintercom/)',
+    icon: 'https://github.com/diyruz/Zintercom/blob/master/images/z2m.png?raw=true',
     fromZigbee: [
         fromZigbeeConverters.battery,
         fz.diy_zintercom_config,
@@ -169,37 +161,11 @@ const device = {
     configure: async (device, coordinatorEndpoint) => {
         const firstEndpoint = device.getEndpoint(1);
 
-        //await bind(firstEndpoint, coordinatorEndpoint, ['msCO2', 'closuresDoorLock', 'genOnOff']);
-
         await bind(firstEndpoint, coordinatorEndpoint, ['closuresDoorLock', 'genPowerCfg']);
+
         const overides = {min: 0, max: 3600, change: 0};
         await configureReporting.batteryVoltage(firstEndpoint, overides);
         await configureReporting.batteryPercentageRemaining(firstEndpoint, overides);
-/*
-        if (device.applicationVersion < 3) { // Legacy PM2 firmwares
-            const payload = [{
-                attribute: 'batteryPercentageRemaining',
-                minimumReportInterval: 0,
-                maximumReportInterval: 3600,
-                reportableChange: 0,
-            }, {
-                attribute: 'batteryVoltage',
-                minimumReportInterval: 0,
-                maximumReportInterval: 3600,
-                reportableChange: 0,
-            }];
-            await firstEndpoint.configureReporting('genPowerCfg', payload);
-        }
-        */
-/*
-        const msBindPayload = [{
-            attribute: 'measuredValue',
-            minimumReportInterval: 0,
-            maximumReportInterval: 3600,
-            reportableChange: 0,
-        }];
-        await firstEndpoint.configureReporting('msCO2', msBindPayload);
-*/
 
         const payload = [{
             attribute: {
@@ -212,20 +178,6 @@ const device = {
           },
         ];
         await firstEndpoint.configureReporting('closuresDoorLock', payload);
-        /**/
-        /*
-        await firstEndpoint.configureReporting('msTemperatureMeasurement', msBindPayload);
-        await firstEndpoint.configureReporting('msRelativeHumidity', msBindPayload);
-
-        const pressureBindPayload = [{
-            attribute: 'scaledValue',
-            minimumReportInterval: 0,
-            maximumReportInterval: 3600,
-            reportableChange: 0,
-        }];
-        await firstEndpoint.configureReporting('msPressureMeasurement', pressureBindPayload);
-        */
-
 
     },
     exposes: [