commit 496c206ebc41e03e356ac649ab2efa67ca59b3cd Author: lost Date: Sun Dec 27 14:40:06 2020 +0200 init commit diff --git a/.clang-format b/.clang-format new file mode 100644 index 0000000..d51976a --- /dev/null +++ b/.clang-format @@ -0,0 +1,5 @@ +--- +# We'll use defaults from the LLVM style, but with 4 columns indentation. +BasedOnStyle: LLVM +IndentWidth: 4 +ColumnLimit: 180 \ No newline at end of file diff --git a/.gitignore b/.gitignore new file mode 100644 index 0000000..b95b4cc --- /dev/null +++ b/.gitignore @@ -0,0 +1,60 @@ +# IAR C-STAT and C-RUN +# Comment this out if you use C-Stat or C-Run to compile/analyze your project +*.ewt + +# IAR Debugger files +*.ewd + + +# IAR Settings +**/settings/*.crun +**/settings/*.dbgdt +**/settings/*.cspy +**/settings/*.cspy.* +**/settings/*.xcl +**/settings/*.dni +**/settings/*.wsdt +**/settings/*.wspos + +# IAR Debug Exe +**/CoordinatorEB/Exe/ + +# IAR Debug List +**/CoordinatorEB/List + +# IAR Debug Obj +**/CoordinatorEB/Obj/*.pbd +**/CoordinatorEB/Obj/*.pbd.* +**/CoordinatorEB/Obj/*.pbi +**/CoordinatorEB/Obj/*.pbi.* +**/CoordinatorEB/Obj/*.r51 + +# Log files +**.log + +# IAR backup files +Backup* + +# IAR .dep files +*.dep + +# Compiled Binaries +*.bin +*.elf +*.map + +# Trash files +*.bak + +# CC2530DB + +CC2530DB/CHDTECH_DEV* + +CC2530DB/Zintercom* + +Source/version.c +!.vscode/ +.vscode/settings.json +firmwares/* + +zstack-lib diff --git a/.gitmodules b/.gitmodules new file mode 100644 index 0000000..a0de877 --- /dev/null +++ b/.gitmodules @@ -0,0 +1,3 @@ +[submodule "zstack-lib"] + path = zstack-lib + url = git@github.com:diyruz/zstack-lib.git diff --git a/.release-it.yml b/.release-it.yml new file mode 100644 index 0000000..32ba347 --- /dev/null +++ b/.release-it.yml @@ -0,0 +1,6 @@ +git: + requireCleanWorkingDir: false +github: + release: true + assets: ["firmwares/DIY_*.hex", "converters/DIY_*.js"] + draft: false diff --git a/.vscode/c_cpp_properties.json b/.vscode/c_cpp_properties.json new file mode 100644 index 0000000..aa5f276 --- /dev/null +++ b/.vscode/c_cpp_properties.json @@ -0,0 +1,37 @@ +{ + "configurations": [{ + "name": "Mac", + "forcedInclude": ["${workspaceRoot}/source/preinclude.h"], + "defines": ["HAL_BOARD_TARGET", "HAL_I2C=TRUE", "HAL_I2C_MASTER"], + "includePath": [ + "${workspaceRoot}", + "${workspaceRoot}/BME280_driver", + "${workspaceRoot}/Source", + "${workspaceRoot}/zstack-lib", + "${env:ZSTACK_PATH}/Components/mac/include/", + "${env:ZSTACK_PATH}/Components/mt", + "${env:ZSTACK_PATH}/Components/zmac", + "${env:ZSTACK_PATH}/Components/zmac/f8w", + "${env:ZSTACK_PATH}/Components/osal/include", + "${env:ZSTACK_PATH}/Components/stack/af", + "${env:ZSTACK_PATH}/Components/stack/bdb", + "${env:ZSTACK_PATH}/Components/stack/sec", + "${env:ZSTACK_PATH}/Components/stack/sys", + "${env:ZSTACK_PATH}/Components/stack/zdo", + "${env:ZSTACK_PATH}/Components/stack/GP", + "${env:ZSTACK_PATH}/Components/stack/nwk", + "${env:ZSTACK_PATH}/Components/stack/zcl", + "${env:ZSTACK_PATH}/Components/hal/target/CC2530EB/", + "${env:ZSTACK_PATH}/Components/hal/include/", + "${env:ZSTACK_PATH}/Components/services/saddr/", + "${env:ZSTACK_PATH}/Components/services/sdata/", + "${env:ZSTACK_PATH}/Projects/zstack/ZMain/TI2530DB", + "${env:ZSTACK_PATH}/Projects/zstack/HomeAutomation/Source" + ], + "intelliSenseMode": "clang-x64", + "compilerPath": "/usr/bin/clang", + "cStandard": "c99", + "cppStandard": "c++17" + }], + "version": 4 +} \ No newline at end of file diff --git a/CC2530DB/GenericApp.ewp b/CC2530DB/GenericApp.ewp new file mode 100644 index 0000000..a1d7980 --- /dev/null +++ b/CC2530DB/GenericApp.ewp @@ -0,0 +1,9833 @@ + + + 3 + + CHDTECH_DEV_End + + 8051 + + 1 + + General + 4 + + 9 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + ICC8051 + 7 + + 12 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + A8051 + 2 + + 6 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + CUSTOM + 3 + + + + 0 + + + + BICOMP + 0 + + + + BUILDACTION + 1 + + Python.exe "$PROJ_DIR$\..\ver.py" + + + + + XLINK + 4 + + 21 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + XAR + 2 + + 1 + 1 + 1 + + + + + + + HWMUL + 0 + + + + BILINK + 0 + + + + + CHDTECH_DEV_Router + + 8051 + + 1 + + General + 4 + + 9 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + ICC8051 + 7 + + 12 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + A8051 + 2 + + 6 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + CUSTOM + 3 + + + + 0 + + + + BICOMP + 0 + + + + BUILDACTION + 1 + + Python.exe "$PROJ_DIR$\..\ver.py" + + + + + XLINK + 4 + + 21 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + XAR + 2 + + 1 + 1 + 1 + + + + + + + HWMUL + 0 + + + + BILINK + 0 + + + + + Zintercom_EndDevice + + 8051 + + 0 + + General + 4 + + 9 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + ICC8051 + 7 + + 12 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + A8051 + 2 + + 6 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + CUSTOM + 3 + + + + 0 + + + + BICOMP + 0 + + + + BUILDACTION + 1 + + Python.exe "$PROJ_DIR$\..\ver.py" + + + + + XLINK + 4 + + 21 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + XAR + 2 + + 1 + 1 + 0 + + + + + + + HWMUL + 0 + + + + BILINK + 0 + + + + + Zintercom_Router + + 8051 + + 0 + + General + 4 + + 9 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + ICC8051 + 7 + + 12 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + A8051 + 2 + + 6 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + CUSTOM + 3 + + + + 0 + + + + BICOMP + 0 + + + + BUILDACTION + 1 + + Python.exe "$PROJ_DIR$\..\ver.py" + + + + + XLINK + 4 + + 21 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + XAR + 2 + + 1 + 1 + 0 + + + + + + + HWMUL + 0 + + + + BILINK + 0 + + + + + Zintercom_EndDevice_CC2592 + + 8051 + + 0 + + General + 4 + + 9 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + ICC8051 + 7 + + 12 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + A8051 + 2 + + 6 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + CUSTOM + 3 + + + + 0 + + + + BICOMP + 0 + + + + BUILDACTION + 1 + + Python.exe "$PROJ_DIR$\..\ver.py" + + + + + XLINK + 4 + + 21 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + XAR + 2 + + 1 + 1 + 0 + + + + + + + HWMUL + 0 + + + + BILINK + 0 + + + + + Zintercom_Router_CC2592 + + 8051 + + 0 + + General + 4 + + 9 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + ICC8051 + 7 + + 12 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + A8051 + 2 + + 6 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + CUSTOM + 3 + + + + 0 + + + + BICOMP + 0 + + + + BUILDACTION + 1 + + Python.exe "$PROJ_DIR$\..\ver.py" + + + + + XLINK + 4 + + 21 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + XAR + 2 + + 1 + 1 + 0 + + + + + + + HWMUL + 0 + + + + BILINK + 0 + + + + + Zintercom_EndDevice_CC2591 + + 8051 + + 0 + + General + 4 + + 9 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + ICC8051 + 7 + + 12 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + A8051 + 2 + + 6 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + CUSTOM + 3 + + + + 0 + + + + BICOMP + 0 + + + + BUILDACTION + 1 + + Python.exe "$PROJ_DIR$\..\ver.py" + + + + + XLINK + 4 + + 21 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + XAR + 2 + + 1 + 1 + 0 + + + + + + + HWMUL + 0 + + + + BILINK + 0 + + + + + Zintercom_Router_CC2591 + + 8051 + + 0 + + General + 4 + + 9 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + ICC8051 + 7 + + 12 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + A8051 + 2 + + 6 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + CUSTOM + 3 + + + + 0 + + + + BICOMP + 0 + + + + BUILDACTION + 1 + + Python.exe "$PROJ_DIR$\..\ver.py" + + + + + XLINK + 4 + + 21 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + XAR + 2 + + 1 + 1 + 0 + + + + + + + HWMUL + 0 + + + + BILINK + 0 + + + + + App + + $PROJ_DIR$\..\Source\OSAL_App.c + + + $PROJ_DIR$\..\Source\preinclude.h + + + $PROJ_DIR$\..\zstack-lib\stdint.h + + + $PROJ_DIR$\..\Source\version.c + + + $PROJ_DIR$\..\Source\version.h + + + $PROJ_DIR$\..\Source\zcl_app.c + + + $PROJ_DIR$\..\Source\zcl_app.h + + + $PROJ_DIR$\..\Source\zcl_app_data.c + + + + BDB + + $PROJ_DIR$\..\..\..\..\..\Components\stack\bdb\bdb.c + + + $PROJ_DIR$\..\..\..\..\..\Components\stack\bdb\bdb.h + + + $PROJ_DIR$\..\..\..\..\..\Components\stack\bdb\bdb_FindingAndBinding.c + + + $PROJ_DIR$\..\..\..\..\..\Components\stack\bdb\bdb_interface.h + + + $PROJ_DIR$\..\..\..\..\..\Components\stack\bdb\bdb_Reporting.c + + + $PROJ_DIR$\..\..\..\..\..\Components\stack\bdb\bdb_Reporting.h + + + $PROJ_DIR$\..\..\..\..\..\Components\stack\bdb\bdb_tlCommissioning.c + + + $PROJ_DIR$\..\..\..\..\..\Components\stack\bdb\bdb_tlCommissioning.h + + + $PROJ_DIR$\..\..\..\..\..\Components\stack\bdb\bdb_touchlink.c + + + $PROJ_DIR$\..\..\..\..\..\Components\stack\bdb\bdb_touchlink.h + + + $PROJ_DIR$\..\..\..\..\..\Components\stack\bdb\bdb_touchlink_target.c + + + $PROJ_DIR$\..\..\..\..\..\Components\stack\bdb\bdb_touchlink_target.h + + + + HAL + + Common + + $PROJ_DIR$\..\..\..\..\..\Components\hal\common\hal_assert.c + + + $PROJ_DIR$\..\..\..\..\..\Components\hal\common\hal_drivers.c + + + + Include + + $PROJ_DIR$\..\..\..\..\..\Components\hal\include\hal_adc.h + + + $PROJ_DIR$\..\..\..\..\..\Components\hal\include\hal_assert.h + + + $PROJ_DIR$\..\..\..\..\..\Components\hal\include\hal_board.h + + + $PROJ_DIR$\..\Source\hal_board_cfg.h + + + $PROJ_DIR$\..\..\..\..\..\Components\hal\include\hal_defs.h + + + $PROJ_DIR$\..\..\..\..\..\Components\hal\include\hal_drivers.h + + + $PROJ_DIR$\..\..\..\..\..\Components\hal\include\hal_flash.h + + + $PROJ_DIR$\..\..\..\..\..\Components\hal\include\hal_led.h + + + $PROJ_DIR$\..\..\..\..\..\Components\hal\include\hal_sleep.h + + + $PROJ_DIR$\..\..\..\..\..\Components\hal\include\hal_timer.h + + + $PROJ_DIR$\..\..\..\..\..\Components\hal\include\hal_uart.h + + + + Target + + CC2530EB + + Config + + + Drivers + + $PROJ_DIR$\..\..\..\..\..\Components\hal\target\CC2530EB\hal_adc.c + + + $PROJ_DIR$\..\..\..\..\..\Components\hal\target\CC2530EB\hal_dma.c + + + $PROJ_DIR$\..\..\..\..\..\Components\hal\target\CC2530EB\hal_flash.c + + + $PROJ_DIR$\..\..\..\..\..\Components\hal\target\CC2530EB\hal_led.c + + + $PROJ_DIR$\..\..\..\..\..\Components\hal\target\CC2530EB\hal_sleep.c + + + $PROJ_DIR$\..\..\..\..\..\Components\hal\target\CC2530EB\hal_startup.c + + + $PROJ_DIR$\..\..\..\..\..\Components\hal\target\CC2530EB\hal_timer.c + + + $PROJ_DIR$\..\..\..\..\..\Components\hal\target\CC2530EB\hal_uart.c + + + + Includes + + $PROJ_DIR$\..\..\..\..\..\Components\hal\target\CC2530EB\hal_aes.h + + + $PROJ_DIR$\..\..\..\..\..\Components\hal\target\CC2530EB\hal_ccm.h + + + $PROJ_DIR$\..\..\..\..\..\Components\hal\target\CC2530EB\hal_dma.h + + + $PROJ_DIR$\..\..\..\..\..\Components\hal\target\CC2530EB\hal_mcu.h + + + $PROJ_DIR$\..\..\..\..\..\Components\hal\target\CC2530EB\hal_types.h + + + + + + + MAC + + High Level + + $PROJ_DIR$\..\..\..\..\..\Components\mac\high_level\mac_cfg.c + + + $PROJ_DIR$\..\..\..\..\..\Components\mac\high_level\mac_high_level.h + + + $PROJ_DIR$\..\..\..\..\..\Components\mac\high_level\mac_pib.c + + + $PROJ_DIR$\..\..\..\..\..\Components\mac\high_level\mac_pib.h + + + $PROJ_DIR$\..\..\..\..\..\Components\mac\high_level\mac_spec.h + + + + Include + + $PROJ_DIR$\..\..\..\..\..\Components\mac\include\mac_api.h + + + + Low Level + + Common + + $PROJ_DIR$\..\..\..\..\..\Components\mac\low_level\srf04\mac_assert.h + + + $PROJ_DIR$\..\..\..\..\..\Components\mac\low_level\srf04\mac_autopend.c + + + $PROJ_DIR$\..\..\..\..\..\Components\mac\low_level\srf04\mac_autopend.h + + + $PROJ_DIR$\..\..\..\..\..\Components\mac\low_level\srf04\mac_backoff_timer.c + + + $PROJ_DIR$\..\..\..\..\..\Components\mac\low_level\srf04\mac_backoff_timer.h + + + $PROJ_DIR$\..\..\..\..\..\Components\mac\low_level\srf04\mac_low_level.c + + + $PROJ_DIR$\..\..\..\..\..\Components\mac\low_level\srf04\mac_low_level.h + + + $PROJ_DIR$\..\..\..\..\..\Components\mac\low_level\srf04\mac_radio.c + + + $PROJ_DIR$\..\..\..\..\..\Components\mac\low_level\srf04\mac_radio.h + + + $PROJ_DIR$\..\..\..\..\..\Components\mac\low_level\srf04\mac_rx.c + + + $PROJ_DIR$\..\..\..\..\..\Components\mac\low_level\srf04\mac_rx.h + + + $PROJ_DIR$\..\..\..\..\..\Components\mac\low_level\srf04\mac_rx_onoff.c + + + $PROJ_DIR$\..\..\..\..\..\Components\mac\low_level\srf04\mac_rx_onoff.h + + + $PROJ_DIR$\..\..\..\..\..\Components\mac\low_level\srf04\mac_sleep.c + + + $PROJ_DIR$\..\..\..\..\..\Components\mac\low_level\srf04\mac_sleep.h + + + $PROJ_DIR$\..\..\..\..\..\Components\mac\low_level\srf04\mac_tx.c + + + $PROJ_DIR$\..\..\..\..\..\Components\mac\low_level\srf04\mac_tx.h + + + + System + + $PROJ_DIR$\..\..\..\..\..\Components\mac\low_level\srf04\single_chip\mac_csp_tx.c + + + $PROJ_DIR$\..\..\..\..\..\Components\mac\low_level\srf04\single_chip\mac_csp_tx.h + + + $PROJ_DIR$\..\..\..\..\..\Components\mac\low_level\srf04\single_chip\mac_mcu.c + + + $PROJ_DIR$\..\..\..\..\..\Components\mac\low_level\srf04\single_chip\mac_mcu.h + + + $PROJ_DIR$\..\..\..\..\..\Components\mac\low_level\srf04\single_chip\mac_mem.c + + + $PROJ_DIR$\..\..\..\..\..\Components\mac\low_level\srf04\single_chip\mac_mem.h + + + $PROJ_DIR$\..\..\..\..\..\Components\mac\low_level\srf04\single_chip\mac_radio_defs.c + + + $PROJ_DIR$\..\..\..\..\..\Components\mac\low_level\srf04\single_chip\mac_radio_defs.h + + + $PROJ_DIR$\..\..\..\..\..\Components\mac\low_level\srf04\single_chip\mac_rffrontend.c + + + + + + MT + + $PROJ_DIR$\..\..\..\..\..\Components\mt\DebugTrace.c + + + $PROJ_DIR$\..\..\..\..\..\Components\mt\DebugTrace.h + + + $PROJ_DIR$\..\..\..\..\..\Components\mt\MT.c + + + $PROJ_DIR$\..\..\..\..\..\Components\mt\MT.h + + + $PROJ_DIR$\..\..\..\..\..\Components\mt\MT_AF.c + + + $PROJ_DIR$\..\..\..\..\..\Components\mt\MT_AF.h + + + $PROJ_DIR$\..\..\..\..\..\Components\mt\MT_APP.c + + + $PROJ_DIR$\..\..\..\..\..\Components\mt\MT_APP.h + + + $PROJ_DIR$\..\..\..\..\..\Components\mt\MT_APP_CONFIG.c + + + $PROJ_DIR$\..\..\..\..\..\Components\mt\MT_APP_CONFIG.h + + + $PROJ_DIR$\..\..\..\..\..\Components\mt\MT_DEBUG.c + + + $PROJ_DIR$\..\..\..\..\..\Components\mt\MT_DEBUG.h + + + $PROJ_DIR$\..\..\..\..\..\Components\mt\MT_GP.c + + + $PROJ_DIR$\..\..\..\..\..\Components\mt\MT_GP.h + + + $PROJ_DIR$\..\..\..\..\..\Components\mt\MT_NWK.c + + + $PROJ_DIR$\..\..\..\..\..\Components\mt\MT_NWK.h + + + $PROJ_DIR$\..\..\..\..\..\Components\mt\MT_RPC.h + + + $PROJ_DIR$\..\..\..\..\..\Components\mt\MT_SAPI.c + + + $PROJ_DIR$\..\..\..\..\..\Components\mt\MT_SAPI.h + + + $PROJ_DIR$\..\..\..\..\..\Components\mt\MT_SYS.c + + + $PROJ_DIR$\..\..\..\..\..\Components\mt\MT_SYS.h + + + $PROJ_DIR$\..\..\..\..\..\Components\mt\MT_TASK.c + + + $PROJ_DIR$\..\..\..\..\..\Components\mt\MT_TASK.h + + + $PROJ_DIR$\..\..\..\..\..\Components\mt\MT_UART.c + + + $PROJ_DIR$\..\..\..\..\..\Components\mt\MT_UART.h + + + $PROJ_DIR$\..\..\..\..\..\Components\mt\MT_UTIL.c + + + $PROJ_DIR$\..\..\..\..\..\Components\mt\MT_UTIL.h + + + $PROJ_DIR$\..\..\..\..\..\Components\mt\MT_VERSION.c + + + $PROJ_DIR$\..\..\..\..\..\Components\mt\MT_VERSION.h + + + $PROJ_DIR$\..\..\..\..\..\Components\mt\MT_ZDO.c + + + $PROJ_DIR$\..\..\..\..\..\Components\mt\MT_ZDO.h + + + + NWK + + $PROJ_DIR$\..\..\..\..\..\Components\stack\nwk\AddrMgr.h + + + $PROJ_DIR$\..\..\..\..\..\Components\stack\nwk\APS.h + + + $PROJ_DIR$\..\..\..\..\..\Components\stack\nwk\aps_frag.h + + + $PROJ_DIR$\..\..\..\..\..\Components\stack\nwk\aps_groups.h + + + $PROJ_DIR$\..\..\..\..\..\Components\stack\nwk\aps_util.h + + + $PROJ_DIR$\..\..\..\..\..\Components\stack\nwk\APSMEDE.h + + + $PROJ_DIR$\..\..\..\..\..\Components\stack\nwk\AssocList.h + + + $PROJ_DIR$\..\..\..\..\..\Components\stack\nwk\BindingTable.c + + + $PROJ_DIR$\..\..\..\..\..\Components\stack\nwk\BindingTable.h + + + $PROJ_DIR$\..\..\..\..\..\Components\stack\nwk\NLMEDE.h + + + $PROJ_DIR$\..\..\..\..\..\Components\stack\nwk\nwk.h + + + $PROJ_DIR$\..\..\..\..\..\Components\stack\nwk\nwk_bufs.h + + + $PROJ_DIR$\..\..\..\..\..\Components\stack\nwk\nwk_globals.c + + + $PROJ_DIR$\..\..\..\..\..\Components\stack\nwk\nwk_globals.h + + + $PROJ_DIR$\..\..\..\..\..\Components\stack\nwk\nwk_util.h + + + $PROJ_DIR$\..\..\..\..\..\Components\stack\nwk\reflecttrack.h + + + $PROJ_DIR$\..\..\..\..\..\Components\stack\nwk\rtg.h + + + $PROJ_DIR$\..\..\..\..\..\Components\stack\nwk\stub_aps.c + + + $PROJ_DIR$\..\..\..\..\..\Components\stack\nwk\stub_aps.h + + + $PROJ_DIR$\..\..\..\..\..\Components\stack\sys\ZDiags.c + + + $PROJ_DIR$\..\..\..\..\..\Components\stack\sys\ZDiags.h + + + $PROJ_DIR$\..\..\..\..\..\Components\stack\sys\ZGlobals.c + + + $PROJ_DIR$\..\..\..\..\..\Components\stack\sys\ZGlobals.h + + + + OSAL + + $PROJ_DIR$\..\..\..\..\..\Components\osal\include\comdef.h + + + $PROJ_DIR$\..\..\..\..\..\Components\osal\common\OSAL.c + + + $PROJ_DIR$\..\..\..\..\..\Components\osal\include\OSAL.h + + + $PROJ_DIR$\..\..\..\..\..\Components\osal\common\OSAL_Clock.c + + + $PROJ_DIR$\..\..\..\..\..\Components\osal\include\OSAL_Clock.h + + + $PROJ_DIR$\..\..\..\..\..\Components\osal\mcu\cc2530\OSAL_Math.s51 + + + $PROJ_DIR$\..\..\..\..\..\Components\osal\common\OSAL_Memory.c + + + $PROJ_DIR$\..\..\..\..\..\Components\osal\include\OSAL_Memory.h + + + $PROJ_DIR$\..\..\..\..\..\Components\osal\mcu\cc2530\OSAL_Nv.c + + + $PROJ_DIR$\..\..\..\..\..\Components\osal\include\OSAL_Nv.h + + + $PROJ_DIR$\..\..\..\..\..\Components\osal\common\OSAL_PwrMgr.c + + + $PROJ_DIR$\..\..\..\..\..\Components\osal\include\OSAL_PwrMgr.h + + + $PROJ_DIR$\..\..\..\..\..\Components\osal\include\OSAL_Tasks.h + + + $PROJ_DIR$\..\..\..\..\..\Components\osal\common\OSAL_Timers.c + + + $PROJ_DIR$\..\..\..\..\..\Components\osal\include\OSAL_Timers.h + + + $PROJ_DIR$\..\..\..\..\..\Components\osal\include\ZComDef.h + + + + Profile + + $PROJ_DIR$\..\..\..\..\..\Components\stack\af\AF.c + + + $PROJ_DIR$\..\..\..\..\..\Components\stack\af\AF.h + + + $PROJ_DIR$\..\..\..\..\..\Components\stack\zcl\zcl.c + + + $PROJ_DIR$\..\..\..\..\..\Components\stack\zcl\zcl.h + + + $PROJ_DIR$\..\..\..\..\..\Components\stack\zcl\zcl_general.c + + + $PROJ_DIR$\..\..\..\..\..\Components\stack\zcl\zcl_general.h + + + + Security + + $PROJ_DIR$\..\..\..\..\..\Components\stack\sec\ssp.h + + + $PROJ_DIR$\..\..\..\..\..\Components\stack\sec\ssp_hash.h + + + + Services + + $PROJ_DIR$\..\..\..\..\..\Components\services\saddr\saddr.c + + + $PROJ_DIR$\..\..\..\..\..\Components\services\saddr\saddr.h + + + + Tools + + $PROJ_DIR$\..\..\..\Tools\CC2530DB\f8w2530.xcl + + + $PROJ_DIR$\..\..\..\Tools\CC2530DB\f8wConfig.cfg + + + $PROJ_DIR$\..\..\..\Tools\CC2530DB\f8wCoord.cfg + + CHDTECH_DEV_End + CHDTECH_DEV_Router + Zintercom_EndDevice + Zintercom_Router + Zintercom_EndDevice_CC2592 + Zintercom_Router_CC2592 + Zintercom_EndDevice_CC2591 + Zintercom_Router_CC2591 + + + + $PROJ_DIR$\..\..\..\Tools\CC2530DB\f8wEndev.cfg + + + $PROJ_DIR$\..\..\..\Tools\CC2530DB\f8wRouter.cfg + + CHDTECH_DEV_End + CHDTECH_DEV_Router + Zintercom_EndDevice + Zintercom_EndDevice_CC2592 + Zintercom_EndDevice_CC2591 + + + + $PROJ_DIR$\..\..\..\Tools\CC2530DB\f8wZCL.cfg + + + + Utils + + + ZDO + + $PROJ_DIR$\..\..\..\..\..\Components\stack\zdo\ZDApp.c + + + $PROJ_DIR$\..\..\..\..\..\Components\stack\zdo\ZDApp.h + + + $PROJ_DIR$\..\..\..\..\..\Components\stack\zdo\ZDConfig.c + + + $PROJ_DIR$\..\..\..\..\..\Components\stack\zdo\ZDConfig.h + + + $PROJ_DIR$\..\..\..\..\..\Components\stack\zdo\ZDNwkMgr.c + + + $PROJ_DIR$\..\..\..\..\..\Components\stack\zdo\ZDNwkMgr.h + + + $PROJ_DIR$\..\..\..\..\..\Components\stack\zdo\ZDObject.c + + + $PROJ_DIR$\..\..\..\..\..\Components\stack\zdo\ZDObject.h + + + $PROJ_DIR$\..\..\..\..\..\Components\stack\zdo\ZDProfile.c + + + $PROJ_DIR$\..\..\..\..\..\Components\stack\zdo\ZDProfile.h + + + $PROJ_DIR$\..\..\..\..\..\Components\stack\zdo\ZDSecMgr.c + + + $PROJ_DIR$\..\..\..\..\..\Components\stack\zdo\ZDSecMgr.h + + + + ZMac + + $PROJ_DIR$\..\..\..\..\..\Components\zmac\f8w\zmac.c + + + $PROJ_DIR$\..\..\..\..\..\Components\zmac\ZMAC.h + + + $PROJ_DIR$\..\..\..\..\..\Components\zmac\f8w\zmac_cb.c + + + $PROJ_DIR$\..\..\..\..\..\Components\zmac\f8w\zmac_internal.h + + + + ZMain + + $PROJ_DIR$\..\..\..\ZMain\TI2530DB\chipcon_cstartup.s51 + + + $PROJ_DIR$\..\..\..\ZMain\TI2530DB\OnBoard.c + + + $PROJ_DIR$\..\..\..\ZMain\TI2530DB\OnBoard.h + + + $PROJ_DIR$\..\..\..\ZMain\TI2530DB\ZMain.c + + + + zstack-lib + + $PROJ_DIR$\..\zstack-lib\battery.h + + + $PROJ_DIR$\..\zstack-lib\bettery.c + + + $PROJ_DIR$\..\zstack-lib\commissioning.c + + + $PROJ_DIR$\..\zstack-lib\commissioning.h + + + $PROJ_DIR$\..\zstack-lib\Debug.c + + + $PROJ_DIR$\..\zstack-lib\Debug.h + + + $PROJ_DIR$\..\zstack-lib\factory_reset.c + + + $PROJ_DIR$\..\zstack-lib\factory_reset.h + + + $PROJ_DIR$\..\zstack-lib\hal_key.c + + + $PROJ_DIR$\..\zstack-lib\hal_key.h + + + $PROJ_DIR$\..\zstack-lib\utils.c + + + $PROJ_DIR$\..\zstack-lib\utils.h + + + diff --git a/CC2530DB/GenericApp.eww b/CC2530DB/GenericApp.eww new file mode 100644 index 0000000..fb43c4a --- /dev/null +++ b/CC2530DB/GenericApp.eww @@ -0,0 +1,35 @@ + + + + $WS_DIR$\GenericApp.ewp + + + + ALL + + GenericApp + Zintercom_Router + + + GenericApp + Zintercom_EndDevice + + + GenericApp + Zintercom_Router_CC2592 + + + GenericApp + Zintercom_EndDevice_CC2592 + + + GenericApp + Zintercom_Router_CC2591 + + + GenericApp + Zintercom_EndDevice_CC2591 + + + + diff --git a/CC2530DB/settings/GenericApp.reggroups b/CC2530DB/settings/GenericApp.reggroups new file mode 100644 index 0000000..305bfd7 --- /dev/null +++ b/CC2530DB/settings/GenericApp.reggroups @@ -0,0 +1,2 @@ +group = "io", "P0" +group = "Unnamed2", "P1" diff --git a/LICENSE b/LICENSE new file mode 100644 index 0000000..f288702 --- /dev/null +++ b/LICENSE @@ -0,0 +1,674 @@ + GNU GENERAL PUBLIC LICENSE + Version 3, 29 June 2007 + + Copyright (C) 2007 Free Software Foundation, Inc. + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + Preamble + + The GNU General Public License is a free, copyleft license for +software and other kinds of works. + + The licenses for most software and other practical works are designed +to take away your freedom to share and change the works. By contrast, +the GNU General Public License is intended to guarantee your freedom to +share and change all versions of a program--to make sure it remains free +software for all its users. We, the Free Software Foundation, use the +GNU General Public License for most of our software; it applies also to +any other work released this way by its authors. You can apply it to +your programs, too. + + When we speak of free software, we are referring to freedom, not +price. Our General Public Licenses are designed to make sure that you +have the freedom to distribute copies of free software (and charge for +them if you wish), that you receive source code or can get it if you +want it, that you can change the software or use pieces of it in new +free programs, and that you know you can do these things. + + To protect your rights, we need to prevent others from denying you +these rights or asking you to surrender the rights. Therefore, you have +certain responsibilities if you distribute copies of the software, or if +you modify it: responsibilities to respect the freedom of others. + + For example, if you distribute copies of such a program, whether +gratis or for a fee, you must pass on to the recipients the same +freedoms that you received. You must make sure that they, too, receive +or can get the source code. And you must show them these terms so they +know their rights. + + Developers that use the GNU GPL protect your rights with two steps: +(1) assert copyright on the software, and (2) offer you this License +giving you legal permission to copy, distribute and/or modify it. + + For the developers' and authors' protection, the GPL clearly explains +that there is no warranty for this free software. For both users' and +authors' sake, the GPL requires that modified versions be marked as +changed, so that their problems will not be attributed erroneously to +authors of previous versions. + + Some devices are designed to deny users access to install or run +modified versions of the software inside them, although the manufacturer +can do so. This is fundamentally incompatible with the aim of +protecting users' freedom to change the software. The systematic +pattern of such abuse occurs in the area of products for individuals to +use, which is precisely where it is most unacceptable. Therefore, we +have designed this version of the GPL to prohibit the practice for those +products. If such problems arise substantially in other domains, we +stand ready to extend this provision to those domains in future versions +of the GPL, as needed to protect the freedom of users. + + Finally, every program is threatened constantly by software patents. +States should not allow patents to restrict development and use of +software on general-purpose computers, but in those that do, we wish to +avoid the special danger that patents applied to a free program could +make it effectively proprietary. To prevent this, the GPL assures that +patents cannot be used to render the program non-free. + + The precise terms and conditions for copying, distribution and +modification follow. + + TERMS AND CONDITIONS + + 0. Definitions. + + "This License" refers to version 3 of the GNU General Public License. + + "Copyright" also means copyright-like laws that apply to other kinds of +works, such as semiconductor masks. + + "The Program" refers to any copyrightable work licensed under this +License. Each licensee is addressed as "you". "Licensees" and +"recipients" may be individuals or organizations. + + To "modify" a work means to copy from or adapt all or part of the work +in a fashion requiring copyright permission, other than the making of an +exact copy. The resulting work is called a "modified version" of the +earlier work or a work "based on" the earlier work. + + A "covered work" means either the unmodified Program or a work based +on the Program. + + To "propagate" a work means to do anything with it that, without +permission, would make you directly or secondarily liable for +infringement under applicable copyright law, except executing it on a +computer or modifying a private copy. Propagation includes copying, +distribution (with or without modification), making available to the +public, and in some countries other activities as well. + + To "convey" a work means any kind of propagation that enables other +parties to make or receive copies. Mere interaction with a user through +a computer network, with no transfer of a copy, is not conveying. + + An interactive user interface displays "Appropriate Legal Notices" +to the extent that it includes a convenient and prominently visible +feature that (1) displays an appropriate copyright notice, and (2) +tells the user that there is no warranty for the work (except to the +extent that warranties are provided), that licensees may convey the +work under this License, and how to view a copy of this License. If +the interface presents a list of user commands or options, such as a +menu, a prominent item in the list meets this criterion. + + 1. Source Code. + + The "source code" for a work means the preferred form of the work +for making modifications to it. "Object code" means any non-source +form of a work. + + A "Standard Interface" means an interface that either is an official +standard defined by a recognized standards body, or, in the case of +interfaces specified for a particular programming language, one that +is widely used among developers working in that language. + + The "System Libraries" of an executable work include anything, other +than the work as a whole, that (a) is included in the normal form of +packaging a Major Component, but which is not part of that Major +Component, and (b) serves only to enable use of the work with that +Major Component, or to implement a Standard Interface for which an +implementation is available to the public in source code form. A +"Major Component", in this context, means a major essential component +(kernel, window system, and so on) of the specific operating system +(if any) on which the executable work runs, or a compiler used to +produce the work, or an object code interpreter used to run it. + + The "Corresponding Source" for a work in object code form means all +the source code needed to generate, install, and (for an executable +work) run the object code and to modify the work, including scripts to +control those activities. However, it does not include the work's +System Libraries, or general-purpose tools or generally available free +programs which are used unmodified in performing those activities but +which are not part of the work. For example, Corresponding Source +includes interface definition files associated with source files for +the work, and the source code for shared libraries and dynamically +linked subprograms that the work is specifically designed to require, +such as by intimate data communication or control flow between those +subprograms and other parts of the work. + + The Corresponding Source need not include anything that users +can regenerate automatically from other parts of the Corresponding +Source. + + The Corresponding Source for a work in source code form is that +same work. + + 2. Basic Permissions. + + All rights granted under this License are granted for the term of +copyright on the Program, and are irrevocable provided the stated +conditions are met. This License explicitly affirms your unlimited +permission to run the unmodified Program. The output from running a +covered work is covered by this License only if the output, given its +content, constitutes a covered work. This License acknowledges your +rights of fair use or other equivalent, as provided by copyright law. + + You may make, run and propagate covered works that you do not +convey, without conditions so long as your license otherwise remains +in force. You may convey covered works to others for the sole purpose +of having them make modifications exclusively for you, or provide you +with facilities for running those works, provided that you comply with +the terms of this License in conveying all material for which you do +not control copyright. Those thus making or running the covered works +for you must do so exclusively on your behalf, under your direction +and control, on terms that prohibit them from making any copies of +your copyrighted material outside their relationship with you. + + Conveying under any other circumstances is permitted solely under +the conditions stated below. Sublicensing is not allowed; section 10 +makes it unnecessary. + + 3. Protecting Users' Legal Rights From Anti-Circumvention Law. + + No covered work shall be deemed part of an effective technological +measure under any applicable law fulfilling obligations under article +11 of the WIPO copyright treaty adopted on 20 December 1996, or +similar laws prohibiting or restricting circumvention of such +measures. + + When you convey a covered work, you waive any legal power to forbid +circumvention of technological measures to the extent such circumvention +is effected by exercising rights under this License with respect to +the covered work, and you disclaim any intention to limit operation or +modification of the work as a means of enforcing, against the work's +users, your or third parties' legal rights to forbid circumvention of +technological measures. + + 4. Conveying Verbatim Copies. + + You may convey verbatim copies of the Program's source code as you +receive it, in any medium, provided that you conspicuously and +appropriately publish on each copy an appropriate copyright notice; +keep intact all notices stating that this License and any +non-permissive terms added in accord with section 7 apply to the code; +keep intact all notices of the absence of any warranty; and give all +recipients a copy of this License along with the Program. + + You may charge any price or no price for each copy that you convey, +and you may offer support or warranty protection for a fee. + + 5. Conveying Modified Source Versions. + + You may convey a work based on the Program, or the modifications to +produce it from the Program, in the form of source code under the +terms of section 4, provided that you also meet all of these conditions: + + a) The work must carry prominent notices stating that you modified + it, and giving a relevant date. + + b) The work must carry prominent notices stating that it is + released under this License and any conditions added under section + 7. This requirement modifies the requirement in section 4 to + "keep intact all notices". + + c) You must license the entire work, as a whole, under this + License to anyone who comes into possession of a copy. This + License will therefore apply, along with any applicable section 7 + additional terms, to the whole of the work, and all its parts, + regardless of how they are packaged. This License gives no + permission to license the work in any other way, but it does not + invalidate such permission if you have separately received it. + + d) If the work has interactive user interfaces, each must display + Appropriate Legal Notices; however, if the Program has interactive + interfaces that do not display Appropriate Legal Notices, your + work need not make them do so. + + A compilation of a covered work with other separate and independent +works, which are not by their nature extensions of the covered work, +and which are not combined with it such as to form a larger program, +in or on a volume of a storage or distribution medium, is called an +"aggregate" if the compilation and its resulting copyright are not +used to limit the access or legal rights of the compilation's users +beyond what the individual works permit. Inclusion of a covered work +in an aggregate does not cause this License to apply to the other +parts of the aggregate. + + 6. Conveying Non-Source Forms. + + You may convey a covered work in object code form under the terms +of sections 4 and 5, provided that you also convey the +machine-readable Corresponding Source under the terms of this License, +in one of these ways: + + a) Convey the object code in, or embodied in, a physical product + (including a physical distribution medium), accompanied by the + Corresponding Source fixed on a durable physical medium + customarily used for software interchange. + + b) Convey the object code in, or embodied in, a physical product + (including a physical distribution medium), accompanied by a + written offer, valid for at least three years and valid for as + long as you offer spare parts or customer support for that product + model, to give anyone who possesses the object code either (1) a + copy of the Corresponding Source for all the software in the + product that is covered by this License, on a durable physical + medium customarily used for software interchange, for a price no + more than your reasonable cost of physically performing this + conveying of source, or (2) access to copy the + Corresponding Source from a network server at no charge. + + c) Convey individual copies of the object code with a copy of the + written offer to provide the Corresponding Source. This + alternative is allowed only occasionally and noncommercially, and + only if you received the object code with such an offer, in accord + with subsection 6b. + + d) Convey the object code by offering access from a designated + place (gratis or for a charge), and offer equivalent access to the + Corresponding Source in the same way through the same place at no + further charge. You need not require recipients to copy the + Corresponding Source along with the object code. If the place to + copy the object code is a network server, the Corresponding Source + may be on a different server (operated by you or a third party) + that supports equivalent copying facilities, provided you maintain + clear directions next to the object code saying where to find the + Corresponding Source. Regardless of what server hosts the + Corresponding Source, you remain obligated to ensure that it is + available for as long as needed to satisfy these requirements. + + e) Convey the object code using peer-to-peer transmission, provided + you inform other peers where the object code and Corresponding + Source of the work are being offered to the general public at no + charge under subsection 6d. + + A separable portion of the object code, whose source code is excluded +from the Corresponding Source as a System Library, need not be +included in conveying the object code work. + + A "User Product" is either (1) a "consumer product", which means any +tangible personal property which is normally used for personal, family, +or household purposes, or (2) anything designed or sold for incorporation +into a dwelling. In determining whether a product is a consumer product, +doubtful cases shall be resolved in favor of coverage. For a particular +product received by a particular user, "normally used" refers to a +typical or common use of that class of product, regardless of the status +of the particular user or of the way in which the particular user +actually uses, or expects or is expected to use, the product. A product +is a consumer product regardless of whether the product has substantial +commercial, industrial or non-consumer uses, unless such uses represent +the only significant mode of use of the product. + + "Installation Information" for a User Product means any methods, +procedures, authorization keys, or other information required to install +and execute modified versions of a covered work in that User Product from +a modified version of its Corresponding Source. The information must +suffice to ensure that the continued functioning of the modified object +code is in no case prevented or interfered with solely because +modification has been made. + + If you convey an object code work under this section in, or with, or +specifically for use in, a User Product, and the conveying occurs as +part of a transaction in which the right of possession and use of the +User Product is transferred to the recipient in perpetuity or for a +fixed term (regardless of how the transaction is characterized), the +Corresponding Source conveyed under this section must be accompanied +by the Installation Information. But this requirement does not apply +if neither you nor any third party retains the ability to install +modified object code on the User Product (for example, the work has +been installed in ROM). + + The requirement to provide Installation Information does not include a +requirement to continue to provide support service, warranty, or updates +for a work that has been modified or installed by the recipient, or for +the User Product in which it has been modified or installed. Access to a +network may be denied when the modification itself materially and +adversely affects the operation of the network or violates the rules and +protocols for communication across the network. + + Corresponding Source conveyed, and Installation Information provided, +in accord with this section must be in a format that is publicly +documented (and with an implementation available to the public in +source code form), and must require no special password or key for +unpacking, reading or copying. + + 7. Additional Terms. + + "Additional permissions" are terms that supplement the terms of this +License by making exceptions from one or more of its conditions. +Additional permissions that are applicable to the entire Program shall +be treated as though they were included in this License, to the extent +that they are valid under applicable law. If additional permissions +apply only to part of the Program, that part may be used separately +under those permissions, but the entire Program remains governed by +this License without regard to the additional permissions. + + When you convey a copy of a covered work, you may at your option +remove any additional permissions from that copy, or from any part of +it. (Additional permissions may be written to require their own +removal in certain cases when you modify the work.) You may place +additional permissions on material, added by you to a covered work, +for which you have or can give appropriate copyright permission. + + Notwithstanding any other provision of this License, for material you +add to a covered work, you may (if authorized by the copyright holders of +that material) supplement the terms of this License with terms: + + a) Disclaiming warranty or limiting liability differently from the + terms of sections 15 and 16 of this License; or + + b) Requiring preservation of specified reasonable legal notices or + author attributions in that material or in the Appropriate Legal + Notices displayed by works containing it; or + + c) Prohibiting misrepresentation of the origin of that material, or + requiring that modified versions of such material be marked in + reasonable ways as different from the original version; or + + d) Limiting the use for publicity purposes of names of licensors or + authors of the material; or + + e) Declining to grant rights under trademark law for use of some + trade names, trademarks, or service marks; or + + f) Requiring indemnification of licensors and authors of that + material by anyone who conveys the material (or modified versions of + it) with contractual assumptions of liability to the recipient, for + any liability that these contractual assumptions directly impose on + those licensors and authors. + + All other non-permissive additional terms are considered "further +restrictions" within the meaning of section 10. If the Program as you +received it, or any part of it, contains a notice stating that it is +governed by this License along with a term that is a further +restriction, you may remove that term. If a license document contains +a further restriction but permits relicensing or conveying under this +License, you may add to a covered work material governed by the terms +of that license document, provided that the further restriction does +not survive such relicensing or conveying. + + If you add terms to a covered work in accord with this section, you +must place, in the relevant source files, a statement of the +additional terms that apply to those files, or a notice indicating +where to find the applicable terms. + + Additional terms, permissive or non-permissive, may be stated in the +form of a separately written license, or stated as exceptions; +the above requirements apply either way. + + 8. Termination. + + You may not propagate or modify a covered work except as expressly +provided under this License. Any attempt otherwise to propagate or +modify it is void, and will automatically terminate your rights under +this License (including any patent licenses granted under the third +paragraph of section 11). + + However, if you cease all violation of this License, then your +license from a particular copyright holder is reinstated (a) +provisionally, unless and until the copyright holder explicitly and +finally terminates your license, and (b) permanently, if the copyright +holder fails to notify you of the violation by some reasonable means +prior to 60 days after the cessation. + + Moreover, your license from a particular copyright holder is +reinstated permanently if the copyright holder notifies you of the +violation by some reasonable means, this is the first time you have +received notice of violation of this License (for any work) from that +copyright holder, and you cure the violation prior to 30 days after +your receipt of the notice. + + Termination of your rights under this section does not terminate the +licenses of parties who have received copies or rights from you under +this License. If your rights have been terminated and not permanently +reinstated, you do not qualify to receive new licenses for the same +material under section 10. + + 9. Acceptance Not Required for Having Copies. + + You are not required to accept this License in order to receive or +run a copy of the Program. Ancillary propagation of a covered work +occurring solely as a consequence of using peer-to-peer transmission +to receive a copy likewise does not require acceptance. However, +nothing other than this License grants you permission to propagate or +modify any covered work. These actions infringe copyright if you do +not accept this License. Therefore, by modifying or propagating a +covered work, you indicate your acceptance of this License to do so. + + 10. Automatic Licensing of Downstream Recipients. + + Each time you convey a covered work, the recipient automatically +receives a license from the original licensors, to run, modify and +propagate that work, subject to this License. You are not responsible +for enforcing compliance by third parties with this License. + + An "entity transaction" is a transaction transferring control of an +organization, or substantially all assets of one, or subdividing an +organization, or merging organizations. If propagation of a covered +work results from an entity transaction, each party to that +transaction who receives a copy of the work also receives whatever +licenses to the work the party's predecessor in interest had or could +give under the previous paragraph, plus a right to possession of the +Corresponding Source of the work from the predecessor in interest, if +the predecessor has it or can get it with reasonable efforts. + + You may not impose any further restrictions on the exercise of the +rights granted or affirmed under this License. For example, you may +not impose a license fee, royalty, or other charge for exercise of +rights granted under this License, and you may not initiate litigation +(including a cross-claim or counterclaim in a lawsuit) alleging that +any patent claim is infringed by making, using, selling, offering for +sale, or importing the Program or any portion of it. + + 11. Patents. + + A "contributor" is a copyright holder who authorizes use under this +License of the Program or a work on which the Program is based. The +work thus licensed is called the contributor's "contributor version". + + A contributor's "essential patent claims" are all patent claims +owned or controlled by the contributor, whether already acquired or +hereafter acquired, that would be infringed by some manner, permitted +by this License, of making, using, or selling its contributor version, +but do not include claims that would be infringed only as a +consequence of further modification of the contributor version. For +purposes of this definition, "control" includes the right to grant +patent sublicenses in a manner consistent with the requirements of +this License. + + Each contributor grants you a non-exclusive, worldwide, royalty-free +patent license under the contributor's essential patent claims, to +make, use, sell, offer for sale, import and otherwise run, modify and +propagate the contents of its contributor version. + + In the following three paragraphs, a "patent license" is any express +agreement or commitment, however denominated, not to enforce a patent +(such as an express permission to practice a patent or covenant not to +sue for patent infringement). To "grant" such a patent license to a +party means to make such an agreement or commitment not to enforce a +patent against the party. + + If you convey a covered work, knowingly relying on a patent license, +and the Corresponding Source of the work is not available for anyone +to copy, free of charge and under the terms of this License, through a +publicly available network server or other readily accessible means, +then you must either (1) cause the Corresponding Source to be so +available, or (2) arrange to deprive yourself of the benefit of the +patent license for this particular work, or (3) arrange, in a manner +consistent with the requirements of this License, to extend the patent +license to downstream recipients. "Knowingly relying" means you have +actual knowledge that, but for the patent license, your conveying the +covered work in a country, or your recipient's use of the covered work +in a country, would infringe one or more identifiable patents in that +country that you have reason to believe are valid. + + If, pursuant to or in connection with a single transaction or +arrangement, you convey, or propagate by procuring conveyance of, a +covered work, and grant a patent license to some of the parties +receiving the covered work authorizing them to use, propagate, modify +or convey a specific copy of the covered work, then the patent license +you grant is automatically extended to all recipients of the covered +work and works based on it. + + A patent license is "discriminatory" if it does not include within +the scope of its coverage, prohibits the exercise of, or is +conditioned on the non-exercise of one or more of the rights that are +specifically granted under this License. You may not convey a covered +work if you are a party to an arrangement with a third party that is +in the business of distributing software, under which you make payment +to the third party based on the extent of your activity of conveying +the work, and under which the third party grants, to any of the +parties who would receive the covered work from you, a discriminatory +patent license (a) in connection with copies of the covered work +conveyed by you (or copies made from those copies), or (b) primarily +for and in connection with specific products or compilations that +contain the covered work, unless you entered into that arrangement, +or that patent license was granted, prior to 28 March 2007. + + Nothing in this License shall be construed as excluding or limiting +any implied license or other defenses to infringement that may +otherwise be available to you under applicable patent law. + + 12. No Surrender of Others' Freedom. + + If conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot convey a +covered work so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you may +not convey it at all. For example, if you agree to terms that obligate you +to collect a royalty for further conveying from those to whom you convey +the Program, the only way you could satisfy both those terms and this +License would be to refrain entirely from conveying the Program. + + 13. Use with the GNU Affero General Public License. + + Notwithstanding any other provision of this License, you have +permission to link or combine any covered work with a work licensed +under version 3 of the GNU Affero General Public License into a single +combined work, and to convey the resulting work. The terms of this +License will continue to apply to the part which is the covered work, +but the special requirements of the GNU Affero General Public License, +section 13, concerning interaction through a network will apply to the +combination as such. + + 14. Revised Versions of this License. + + The Free Software Foundation may publish revised and/or new versions of +the GNU General Public License from time to time. Such new versions will +be similar in spirit to the present version, but may differ in detail to +address new problems or concerns. + + Each version is given a distinguishing version number. If the +Program specifies that a certain numbered version of the GNU General +Public License "or any later version" applies to it, you have the +option of following the terms and conditions either of that numbered +version or of any later version published by the Free Software +Foundation. If the Program does not specify a version number of the +GNU General Public License, you may choose any version ever published +by the Free Software Foundation. + + If the Program specifies that a proxy can decide which future +versions of the GNU General Public License can be used, that proxy's +public statement of acceptance of a version permanently authorizes you +to choose that version for the Program. + + Later license versions may give you additional or different +permissions. However, no additional obligations are imposed on any +author or copyright holder as a result of your choosing to follow a +later version. + + 15. Disclaimer of Warranty. + + THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY +APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT +HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY +OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, +THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR +PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM +IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF +ALL NECESSARY SERVICING, REPAIR OR CORRECTION. + + 16. Limitation of Liability. + + IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING +WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS +THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY +GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE +USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF +DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD +PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), +EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF +SUCH DAMAGES. + + 17. Interpretation of Sections 15 and 16. + + If the disclaimer of warranty and limitation of liability provided +above cannot be given local legal effect according to their terms, +reviewing courts shall apply local law that most closely approximates +an absolute waiver of all civil liability in connection with the +Program, unless a warranty or assumption of liability accompanies a +copy of the Program in return for a fee. + + END OF TERMS AND CONDITIONS + + How to Apply These Terms to Your New Programs + + If you develop a new program, and you want it to be of the greatest +possible use to the public, the best way to achieve this is to make it +free software which everyone can redistribute and change under these terms. + + To do so, attach the following notices to the program. It is safest +to attach them to the start of each source file to most effectively +state the exclusion of warranty; and each file should have at least +the "copyright" line and a pointer to where the full notice is found. + + + Copyright (C) + + This program is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . + +Also add information on how to contact you by electronic and paper mail. + + If the program does terminal interaction, make it output a short +notice like this when it starts in an interactive mode: + + Copyright (C) + This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'. + This is free software, and you are welcome to redistribute it + under certain conditions; type `show c' for details. + +The hypothetical commands `show w' and `show c' should show the appropriate +parts of the General Public License. Of course, your program's commands +might be different; for a GUI interface, you would use an "about box". + + You should also get your employer (if you work as a programmer) or school, +if any, to sign a "copyright disclaimer" for the program, if necessary. +For more information on this, and how to apply and follow the GNU GPL, see +. + + The GNU General Public License does not permit incorporating your program +into proprietary programs. If your program is a subroutine library, you +may consider it more useful to permit linking proprietary applications with +the library. If this is what you want to do, use the GNU Lesser General +Public License instead of this License. But first, please read +. diff --git a/README.md b/README.md new file mode 100644 index 0000000..c3cfd03 --- /dev/null +++ b/README.md @@ -0,0 +1,2 @@ +# Zintercom +# Zigbee Intercom Automator diff --git a/Source/OSAL_App.c b/Source/OSAL_App.c new file mode 100644 index 0000000..06964a0 --- /dev/null +++ b/Source/OSAL_App.c @@ -0,0 +1,70 @@ +#include "OSAL.h" +#include "OSAL_Tasks.h" +#include "ZComDef.h" +#include "hal_drivers.h" + +#include "APS.h" +#include "ZDApp.h" +#include "nwk.h" + +#if defined ( MT_TASK ) + #include "MT.h" + #include "MT_TASK.h" +#endif + +#include "commissioning.h" +#include "factory_reset.h" +#include "Debug.h" +#include "battery.h" + +#include "bdb_interface.h" +#include "zcl_app.h" + +const pTaskEventHandlerFn tasksArr[] = {macEventLoop, + nwk_event_loop, + Hal_ProcessEvent, +#if defined( MT_TASK ) + MT_ProcessEvent, +#endif + APS_event_loop, + ZDApp_event_loop, + zcl_event_loop, + bdb_event_loop, + zclApp_event_loop, + zclCommissioning_event_loop, + zclFactoryResetter_loop +#ifdef ZIC_BATTERY_MODE + , + zclBattery_event_loop +#endif +}; + +const uint8 tasksCnt = sizeof(tasksArr) / sizeof(tasksArr[0]); +uint16 *tasksEvents; + +void osalInitTasks(void) { + uint8 taskID = 0; + DebugInit(); + + tasksEvents = (uint16 *)osal_mem_alloc(sizeof(uint16) * tasksCnt); + osal_memset(tasksEvents, 0, (sizeof(uint16) * tasksCnt)); + macTaskInit(taskID++); + nwk_init(taskID++); + Hal_Init(taskID++); +#if defined( MT_TASK ) + MT_TaskInit( taskID++ ); +#endif + APS_Init(taskID++); + ZDApp_Init(taskID++); + zcl_Init(taskID++); + bdb_Init(taskID++); + zclApp_Init(taskID++); + zclCommissioning_Init(taskID++); + zclFactoryResetter_Init(taskID++); +#ifdef ZIC_BATTERY_MODE + zclBattery_Init(taskID++); +#endif +} + +/********************************************************************* +*********************************************************************/ diff --git a/Source/hal_board_cfg.h b/Source/hal_board_cfg.h new file mode 100644 index 0000000..31f589a --- /dev/null +++ b/Source/hal_board_cfg.h @@ -0,0 +1,472 @@ +#ifndef HAL_BOARD_CFG_H +#define HAL_BOARD_CFG_H + + +/* ------------------------------------------------------------------------------------------------ + * Includes + * ------------------------------------------------------------------------------------------------ + */ + +#include "hal_mcu.h" +#include "hal_defs.h" +#include "hal_types.h" + +/* ------------------------------------------------------------------------------------------------ + * CC2590/CC2591 support + * + * Define HAL_PA_LNA_CC2590 if CC2530+CC2590EM is used + * Define HAL_PA_LNA if CC2530+CC2591EM is used + * Note that only one of them can be defined + * ------------------------------------------------------------------------------------------------ + */ +#define xHAL_PA_LNA +#define xHAL_PA_LNA_CC2590 +#define xHAL_PA_LNA_SE2431L +#define xHAL_PA_LNA_CC2592 + +/* ------------------------------------------------------------------------------------------------ + * Clock Speed + * ------------------------------------------------------------------------------------------------ + */ + +#define HAL_CPU_CLOCK_MHZ 32 + +/* This flag should be defined if the SoC uses the 32MHz crystal + * as the main clock source (instead of DCO). + */ +#define HAL_CLOCK_CRYSTAL + +/* 32 kHz clock source select in CLKCONCMD */ +#if !defined (OSC32K_CRYSTAL_INSTALLED) || (defined (OSC32K_CRYSTAL_INSTALLED) && (OSC32K_CRYSTAL_INSTALLED == TRUE)) + #define OSC_32KHZ 0x00 /* external 32 KHz xosc */ +#else + #define OSC_32KHZ 0x80 /* internal 32 KHz rcosc */ +#endif + +#define HAL_CLOCK_STABLE() st( while (CLKCONSTA != (CLKCONCMD_32MHZ | OSC_32KHZ)); ) + +/* ------------------------------------------------------------------------------------------------ + * LED Configuration + * ------------------------------------------------------------------------------------------------ + */ + +#if defined (HAL_BOARD_CHDTECH_DEV) + #define HAL_NUM_LEDS 4 +#elif defined(HAL_BOARD_TARGET) + #define HAL_NUM_LEDS 4 +#else + #error Unknown Board Indentifier +#endif + +#define HAL_LED_BLINK_DELAY() st( { volatile uint32 i; for (i=0; i<0x5800; i++) { }; } ) + +#if defined(HAL_BOARD_TARGET) + //blue + #define LED1_BV BV(4) + #define LED1_SBIT P1_4 + #define LED1_DDR P1DIR + #define LED1_POLARITY ACTIVE_LOW +//green + #define LED2_BV BV(1) + #define LED2_SBIT P1_1 + #define LED2_DDR P1DIR + #define LED2_POLARITY ACTIVE_LOW +//red + #define LED3_BV BV(0) + #define LED3_SBIT P1_0 + #define LED3_DDR P1DIR + #define LED3_POLARITY ACTIVE_LOW +//ex + #define LED4_BV BV(4) + #define LED4_SBIT P1_5 + #define LED4_DDR P1DIR + #define LED4_POLARITY ACTIVE_LOW + + +#elif defined(HAL_BOARD_CHDTECH_DEV) + //blue + #define LED1_BV BV(4) + #define LED1_SBIT P1_4 + #define LED1_DDR P1DIR + #define LED1_POLARITY ACTIVE_LOW +//green + #define LED2_BV BV(1) + #define LED2_SBIT P1_1 + #define LED2_DDR P1DIR + #define LED2_POLARITY ACTIVE_LOW +//red + #define LED3_BV BV(0) + #define LED3_SBIT P1_0 + #define LED3_DDR P1DIR + #define LED3_POLARITY ACTIVE_LOW +//ex + #define LED4_BV BV(4) + #define LED4_SBIT P1_5 + #define LED4_DDR P1DIR + #define LED4_POLARITY ACTIVE_LOW +#endif + + + +/* ------------------------------------------------------------------------------------------------ + * Push Button Configuration + * ------------------------------------------------------------------------------------------------ + */ + +#define ACTIVE_LOW ! +#define ACTIVE_HIGH !! /* double negation forces result to be '1' */ + +/* S1 */ +#define PUSH1_BV BV(1) +#define PUSH1_SBIT P0_1 + + + + +/* ------------------------------------------------------------------------------------------------ + * OSAL NV implemented by internal flash pages. + * ------------------------------------------------------------------------------------------------ + */ + +// Flash is partitioned into 8 banks of 32 KB or 16 pages. +#define HAL_FLASH_PAGE_PER_BANK 16 +// Flash is constructed of 128 pages of 2 KB. +#define HAL_FLASH_PAGE_SIZE 2048 +#define HAL_FLASH_WORD_SIZE 4 + +// CODE banks get mapped into the XDATA range 8000-FFFF. +#define HAL_FLASH_PAGE_MAP 0x8000 + +// The last 16 bytes of the last available page are reserved for flash lock bits. +// NV page definitions must coincide with segment declaration in project *.xcl file. +#if defined NON_BANKED +#define HAL_FLASH_LOCK_BITS 16 +#define HAL_NV_PAGE_END 30 +#define HAL_NV_PAGE_CNT 2 +#else +#define HAL_FLASH_LOCK_BITS 16 +#define HAL_NV_PAGE_END 126 +#define HAL_NV_PAGE_CNT 6 +#endif + +// Re-defining Z_EXTADDR_LEN here so as not to include a Z-Stack .h file. +#define HAL_FLASH_IEEE_SIZE 8 +#define HAL_FLASH_IEEE_PAGE (HAL_NV_PAGE_END+1) +#define HAL_FLASH_IEEE_OSET (HAL_FLASH_PAGE_SIZE - HAL_FLASH_LOCK_BITS - HAL_FLASH_IEEE_SIZE) +#define HAL_INFOP_IEEE_OSET 0xC + +#define HAL_FLASH_DEV_PRIVATE_KEY_OSET 0x7D2 +#define HAL_FLASH_CA_PUBLIC_KEY_OSET 0x7BC +#define HAL_FLASH_IMPLICIT_CERT_OSET 0x78C + +#define HAL_NV_PAGE_BEG (HAL_NV_PAGE_END-HAL_NV_PAGE_CNT+1) +// Used by DMA macros to shift 1 to create a mask for DMA registers. +#define HAL_NV_DMA_CH 0 +#define HAL_DMA_CH_RX 3 +#define HAL_DMA_CH_TX 4 + +#define HAL_NV_DMA_GET_DESC() HAL_DMA_GET_DESC0() +#define HAL_NV_DMA_SET_ADDR(a) HAL_DMA_SET_ADDR_DESC0((a)) + +/* ------------------------------------------------------------------------------------------------ + * Serial Boot Loader: reserving the first 4 pages of flash and other memory in cc2530-sb.xcl. + * ------------------------------------------------------------------------------------------------ + */ + +#define HAL_SB_IMG_ADDR 0x2000 +#define HAL_SB_CRC_ADDR 0x2090 +// Size of internal flash less 4 pages for boot loader, 6 pages for NV, & 1 page for lock bits. +#define HAL_SB_IMG_SIZE (0x40000 - 0x2000 - 0x3000 - 0x0800) + +/* ------------------------------------------------------------------------------------------------ + * Macros + * ------------------------------------------------------------------------------------------------ + */ + +/* ----------- RF-frontend Connection Initialization ---------- */ +#if defined HAL_PA_LNA || defined HAL_PA_LNA_CC2590 || \ + defined HAL_PA_LNA_SE2431L || defined HAL_PA_LNA_CC2592 +extern void MAC_RfFrontendSetup(void); +#define HAL_BOARD_RF_FRONTEND_SETUP() MAC_RfFrontendSetup() +#else +#define HAL_BOARD_RF_FRONTEND_SETUP() +#endif + +/* ----------- Cache Prefetch control ---------- */ +#define PREFETCH_ENABLE() st( FCTL = 0x08; ) +#define PREFETCH_DISABLE() st( FCTL = 0x04; ) + +/* ----------- Board Initialization ---------- */ +#if defined (HAL_BOARD_CHDTECH_DEV) || (!defined(HAL_PA_LNA) && !defined(HAL_PA_LNA_CC2592)) +#define HAL_BOARD_INIT() \ +{ \ + uint16 i; \ + \ + SLEEPCMD &= ~OSC_PD; /* turn on 16MHz RC and 32MHz XOSC */ \ + while (!(SLEEPSTA & XOSC_STB)); /* wait for 32MHz XOSC stable */ \ + asm("NOP"); /* chip bug workaround */ \ + for (i=0; i<504; i++) asm("NOP"); /* Require 63us delay for all revs */ \ + CLKCONCMD = (CLKCONCMD_32MHZ | OSC_32KHZ); /* Select 32MHz XOSC and the source for 32K clock */ \ + while (CLKCONSTA != (CLKCONCMD_32MHZ | OSC_32KHZ)); /* Wait for the change to be effective */ \ + SLEEPCMD |= OSC_PD; /* turn off 16MHz RC */ \ + \ + /* Turn on cache prefetch mode */ \ + PREFETCH_ENABLE(); \ + \ + LED1_DDR |= LED1_BV; \ + LED2_DDR |= LED2_BV; \ + LED3_DDR |= LED3_BV; \ +} + +#elif defined (HAL_PA_LNA) +#define HAL_BOARD_INIT() \ +{ \ + uint16 i; \ + \ + SLEEPCMD &= ~OSC_PD; /* turn on 16MHz RC and 32MHz XOSC */ \ + while (!(SLEEPSTA & XOSC_STB)); /* wait for 32MHz XOSC stable */ \ + asm("NOP"); /* chip bug workaround */ \ + for (i=0; i<504; i++) asm("NOP"); /* Require 63us delay for all revs */ \ + CLKCONCMD = (CLKCONCMD_32MHZ | OSC_32KHZ); /* Select 32MHz XOSC and the source for 32K clock */ \ + while (CLKCONSTA != (CLKCONCMD_32MHZ | OSC_32KHZ)); /* Wait for the change to be effective */ \ + SLEEPCMD |= OSC_PD; /* turn off 16MHz RC */ \ + \ + /* Turn on cache prefetch mode */ \ + PREFETCH_ENABLE(); \ + \ + /* set direction for GPIO outputs */ \ + /* For SE2431L PA LNA this sets ANT_SEL to output */ \ + /* For CC2592 this enables LNA */ \ + P1DIR |= BV(0) | BV(1); \ + \ + /* Set PA/LNA HGM control P0_7 */ \ + P0DIR |= BV(7); \ + \ + \ + /* setup RF frontend if necessary */ \ + HAL_BOARD_RF_FRONTEND_SETUP(); \ + LED1_DDR |= LED1_BV; \ + LED2_DDR |= LED2_BV; \ + LED3_DDR |= LED3_BV; \ +} + +#elif defined (HAL_PA_LNA_CC2592) || defined (HAL_PA_LNA_SE2431L) +#define HAL_BOARD_INIT() \ +{ \ + uint16 i; \ + \ + SLEEPCMD &= ~OSC_PD; /* turn on 16MHz RC and 32MHz XOSC */ \ + while (!(SLEEPSTA & XOSC_STB)); /* wait for 32MHz XOSC stable */ \ + asm("NOP"); /* chip bug workaround */ \ + for (i=0; i<504; i++) asm("NOP"); /* Require 63us delay for all revs */ \ + CLKCONCMD = (CLKCONCMD_32MHZ | OSC_32KHZ); /* Select 32MHz XOSC and the source for 32K clock */ \ + while (CLKCONSTA != (CLKCONCMD_32MHZ | OSC_32KHZ)); /* Wait for the change to be effective */ \ + SLEEPCMD |= OSC_PD; /* turn off 16MHz RC */ \ + \ + /* Turn on cache prefetch mode */ \ + PREFETCH_ENABLE(); \ + \ + /* set direction for GPIO outputs */ \ + /* For SE2431L PA LNA this sets ANT_SEL to output */ \ + /* For CC2592 this enables LNA */ \ + P1DIR |= BV(0) | BV(1); \ + \ + /* Set PA/LNA HGM control P0_7 */ \ + P0DIR |= BV(7); \ + \ + \ + /* setup RF frontend if necessary */ \ + HAL_BOARD_RF_FRONTEND_SETUP(); \ + LED1_DDR |= LED1_BV; \ + LED2_DDR |= LED2_BV; \ + LED3_DDR |= LED3_BV; \ +} +#endif + +/* ----------- Debounce ---------- */ +#define HAL_DEBOUNCE(expr) { int i; for (i=0; i<500; i++) { if (!(expr)) i = 0; } } + +/* ----------- Push Buttons ---------- */ +#define HAL_PUSH_BUTTON1() (0) +#define HAL_PUSH_BUTTON2() (0) +#define HAL_PUSH_BUTTON3() (0) +#define HAL_PUSH_BUTTON4() (0) +#define HAL_PUSH_BUTTON5() (0) +#define HAL_PUSH_BUTTON6() (0) + +/* ----------- LED's ---------- */ +#define HAL_TURN_OFF_LED1() st( LED1_SBIT = LED1_POLARITY (0); ) +#define HAL_TURN_OFF_LED2() st( LED2_SBIT = LED2_POLARITY (0); ) +#define HAL_TURN_OFF_LED3() st( LED3_SBIT = LED3_POLARITY (0); ) +#define HAL_TURN_OFF_LED4() st( LED4_SBIT = LED4_POLARITY (0); ) + +#define HAL_TURN_ON_LED1() st( LED1_SBIT = LED1_POLARITY (1); ) +#define HAL_TURN_ON_LED2() st( LED2_SBIT = LED2_POLARITY (1); ) +#define HAL_TURN_ON_LED3() st( LED3_SBIT = LED3_POLARITY (1); ) +#define HAL_TURN_ON_LED4() st( LED4_SBIT = LED4_POLARITY (1); ) + +#define HAL_TOGGLE_LED1() st( if (LED1_SBIT) { LED1_SBIT = 0; } else { LED1_SBIT = 1;} ) +#define HAL_TOGGLE_LED2() st( if (LED2_SBIT) { LED2_SBIT = 0; } else { LED2_SBIT = 1;} ) +#define HAL_TOGGLE_LED3() st( if (LED3_SBIT) { LED3_SBIT = 0; } else { LED3_SBIT = 1;} ) +#define HAL_TOGGLE_LED4() st( if (LED4_SBIT) { LED4_SBIT = 0; } else { LED4_SBIT = 1;} ) + +#define HAL_STATE_LED1() (LED1_POLARITY (LED1_SBIT)) +#define HAL_STATE_LED2() (LED2_POLARITY (LED2_SBIT)) +#define HAL_STATE_LED3() (LED3_POLARITY (LED3_SBIT)) +#define HAL_STATE_LED4() (LED4_POLARITY (LED4_SBIT)) + +/* ----------- XNV ---------- */ +#define XNV_SPI_BEGIN() st(P1_3 = 0;) +#define XNV_SPI_TX(x) st(U1CSR &= ~0x02; U1DBUF = (x);) +#define XNV_SPI_RX() U1DBUF +#define XNV_SPI_WAIT_RXRDY() st(while (!(U1CSR & 0x02));) +#define XNV_SPI_END() st(P1_3 = 1;) + +// The TI reference design uses UART1 Alt. 2 in SPI mode. +#define XNV_SPI_INIT() \ +st( \ + /* Mode select UART1 SPI Mode as master. */\ + U1CSR = 0; \ + \ + /* Setup for 115200 baud. */\ + U1GCR = 11; \ + U1BAUD = 216; \ + \ + /* Set bit order to MSB */\ + U1GCR |= BV(5); \ + \ + /* Set UART1 I/O to alternate 2 location on P1 pins. */\ + PERCFG |= 0x02; /* U1CFG */\ + \ + /* Select peripheral function on I/O pins but SS is left as GPIO for separate control. */\ + P1SEL |= 0xE0; /* SELP1_[7:4] */\ + /* P1.1,2,3: reset, LCD CS, XNV CS. */\ + P1SEL &= ~0x0E; \ + P1 |= 0x0E; \ + P1_1 = 0; \ + P1DIR |= 0x0E; \ + \ + /* Give UART1 priority over Timer3. */\ + P2SEL &= ~0x20; /* PRI2P1 */\ + \ + /* When SPI config is complete, enable it. */\ + U1CSR |= 0x40; \ + /* Release XNV reset. */\ + P1_1 = 1; \ +) + +/* ----------- Minimum safe bus voltage ---------- */ + +// Vdd/3 / Internal Reference X ENOB --> (Vdd / 3) / 1.15 X 127 +#define VDD_2_0 74 // 2.0 V required to safely read/write internal flash. +#define VDD_2_7 100 // 2.7 V required for the Numonyx device. +#define VDD_MIN_RUN (VDD_2_0+4) // VDD_MIN_RUN = VDD_MIN_NV +#define VDD_MIN_NV (VDD_2_0+4) // 5% margin over minimum to survive a page erase and compaction. +#define VDD_MIN_GOOD (VDD_2_0+8) // 10% margin over minimum to survive a page erase and compaction. +#define VDD_MIN_XNV (VDD_2_7+5) // 5% margin over minimum to survive a page erase and compaction. + +/* ------------------------------------------------------------------------------------------------ + * Driver Configuration + * ------------------------------------------------------------------------------------------------ + */ + +/* Set to TRUE enable H/W TIMER usage, FALSE disable it */ +#ifndef HAL_TIMER +#define HAL_TIMER FALSE +#endif + +/* Set to TRUE enable ADC usage, FALSE disable it */ +#ifndef HAL_ADC +#define HAL_ADC TRUE +#endif + +/* Set to TRUE enable DMA usage, FALSE disable it */ +#ifndef HAL_DMA +#define HAL_DMA TRUE +#endif + +/* Set to TRUE enable Flash access, FALSE disable it */ +#ifndef HAL_FLASH +#define HAL_FLASH TRUE +#endif + +/* Set to TRUE enable AES usage, FALSE disable it */ +#ifndef HAL_AES +#define HAL_AES TRUE +#endif + +#ifndef HAL_AES_DMA +#define HAL_AES_DMA TRUE +#endif + +/* Set to TRUE enable LCD usage, FALSE disable it */ +#ifndef HAL_LCD +#define HAL_LCD TRUE +#endif + +/* Set to TRUE enable LED usage, FALSE disable it */ +#ifndef HAL_LED +#define HAL_LED TRUE +#endif +#if (!defined BLINK_LEDS) && (HAL_LED == TRUE) +#define BLINK_LEDS +#endif + +/* Set to TRUE enable KEY usage, FALSE disable it */ +#ifndef HAL_KEY +#define HAL_KEY TRUE +#endif + +/* Set to TRUE enable UART usage, FALSE disable it */ +#ifndef HAL_UART +#if (defined ZAPP_P1) || (defined ZAPP_P2) || (defined ZTOOL_P1) || (defined ZTOOL_P2) +#define HAL_UART TRUE +#else +#define HAL_UART FALSE +#endif +#endif + +#if HAL_UART +#ifndef HAL_UART_DMA +#if HAL_DMA +#if (defined ZAPP_P2) || (defined ZTOOL_P2) +#define HAL_UART_DMA 2 +#else +#define HAL_UART_DMA 1 +#endif +#else +#define HAL_UART_DMA 0 +#endif +#endif + +#ifndef HAL_UART_ISR +#if HAL_UART_DMA // Default preference for DMA over ISR. +#define HAL_UART_ISR 0 +#elif (defined ZAPP_P2) || (defined ZTOOL_P2) +#define HAL_UART_ISR 2 +#else +#define HAL_UART_ISR 1 +#endif +#endif + +#if (HAL_UART_DMA && (HAL_UART_DMA == HAL_UART_ISR)) +#error HAL_UART_DMA & HAL_UART_ISR must be different. +#endif + +// Used to set P2 priority - USART0 over USART1 if both are defined. +#if ((HAL_UART_DMA == 1) || (HAL_UART_ISR == 1)) +#define HAL_UART_PRIPO 0x00 +#else +#define HAL_UART_PRIPO 0x40 +#endif + +#else +#define HAL_UART_DMA 0 +#define HAL_UART_ISR 0 +#endif + +/* USB is not used for CC2530 configuration */ +#define HAL_UART_USB 0 +#endif +/******************************************************************************************************* +*/ \ No newline at end of file diff --git a/Source/preinclude.h b/Source/preinclude.h new file mode 100644 index 0000000..bc93f4d --- /dev/null +++ b/Source/preinclude.h @@ -0,0 +1,91 @@ +#define TC_LINKKEY_JOIN +#define NV_INIT +#define NV_RESTORE + +#define TP2_LEGACY_ZC +// patch sdk +// #define ZDSECMGR_TC_ATTEMPT_DEFAULT_KEY TRUE + +#define NWK_AUTO_POLL +#define MULTICAST_ENABLED FALSE + +#define ZCL_READ +#define ZCL_WRITE +#define ZCL_BASIC +#define ZCL_IDENTIFY +#define ZCL_REPORTING_DEVICE + +#define DISABLE_GREENPOWER_BASIC_PROXY +//#define BDB_FINDING_BINDING_CAPABILITY_ENABLED 1 +#define BDB_REPORTING TRUE + + +#define HAL_BUZZER FALSE +#define HAL_KEY TRUE +#define ISR_KEYINTERRUPT + + +#define HAL_LED TRUE +#define HAL_ADC FALSE +#define HAL_LCD FALSE + +#define BLINK_LEDS TRUE + +// one of this boards +// #define HAL_BOARD_TARGET +// #define HAL_BOARD_CHDTECH_DEV + +#if !defined(HAL_BOARD_TARGET) && !defined(HAL_BOARD_CHDTECH_DEV) +#error "Board type must be defined" +#endif + +#if defined(HAL_BOARD_TARGET) + #define HAL_KEY_P0_INPUT_PINS BV(1) + #define HAL_KEY_P2_INPUT_PINS BV(0) + //#define CO2_UART_PORT 0x00 + //#define HAL_UART_DMA 1 + //#define HAL_UART_ISR 0 + #define INT_HEAP_LEN 2256 +#elif defined(HAL_BOARD_CHDTECH_DEV) + #define HAL_UART_DMA 1 + #define HAL_UART_ISR 2 + //#define CO2_UART_PORT 0x01 + //#define HAL_KEY_P0_INPUT_PINS 0x21//pins 1 and 2. BV(1) bv(1) pin 2. bit (1 << n) + #define HAL_KEY_P0_INPUT_PINS BV(1) + #define HAL_KEY_P2_INPUT_PINS BV(0) + #define DO_DEBUG_UART +#endif + +#define FACTORY_RESET_HOLD_TIME_LONG 5000 + + +#ifdef DO_DEBUG_UART + #define HAL_UART TRUE + #define HAL_UART_DMA 1 + #define INT_HEAP_LEN 2060 +#endif + +// #define INT_HEAP_LEN (2685 - 0x4B - 0xBB-0x50-0xae) +// #define HAL_UART TRUE +// #define HAL_UART_DMA 2 +#define HAL_UART TRUE + + +//#define BME280_32BIT_ENABLE +//i2c bme280 +//#define OCM_CLK_PORT 1 +//#define OCM_CLK_PIN 6 + +//#define OCM_DATA_PORT 1 +//#define OCM_DATA_PIN 7 + + +//#define DS18B20_PORT 0 +//#define TSENS_SBIT P0_0 +//#define TSENS_BV BV(0) +//#define TSENS_DIR P0DIR + + + + +#include "hal_board_cfg.h" diff --git a/Source/version.h b/Source/version.h new file mode 100644 index 0000000..aa02db7 --- /dev/null +++ b/Source/version.h @@ -0,0 +1,2 @@ +extern const uint8 zclApp_DateCode[]; +extern const char zclApp_DateCodeNT[]; \ No newline at end of file diff --git a/Source/zcl_app.c b/Source/zcl_app.c new file mode 100644 index 0000000..5505c0c --- /dev/null +++ b/Source/zcl_app.c @@ -0,0 +1,369 @@ + +#include "AF.h" +#include "OSAL.h" +#include "OSAL_Clock.h" +#include "OSAL_PwrMgr.h" +#include "ZComDef.h" +#include "ZDApp.h" +#include "ZDObject.h" +#include "math.h" + +#include "nwk_util.h" +#include "zcl.h" +#include "zcl_app.h" +#include "zcl_diagnostic.h" +#include "zcl_general.h" +#include "zcl_ms.h" + +#include "bdb.h" +#include "bdb_interface.h" +#include "bdb_touchlink.h" +#include "bdb_touchlink_target.h" + +#include "gp_interface.h" + +#include "Debug.h" + +#include "OnBoard.h" + +#include "commissioning.h" +#include "factory_reset.h" +/* HAL */ + +#include "hal_drivers.h" + +#include "hal_key.h" +#include "hal_led.h" + +#include "utils.h" + +#include "battery.h" + +#include "version.h" + +/********************************************************************* + * MACROS + */ + +/********************************************************************* + * CONSTANTS + */ + +/********************************************************************* + * TYPEDEFS + */ + +/********************************************************************* + * GLOBAL VARIABLES + */ +byte zclApp_TaskID; + +/********************************************************************* + * GLOBAL FUNCTIONS + */ +//void user_delay_ms(uint32_t period); +//void user_delay_ms(uint32_t period) { MicroWait(period * 1000); } +/********************************************************************* + * LOCAL VARIABLES + */ + + +/********************************************************************* + * LOCAL FUNCTIONS + */ + +static void zclApp_BasicResetCB(void); +static void zclApp_RestoreAttributesFromNV(void); +static void zclApp_SaveAttributesToNV(void); +static void zclApp_HandleKeys(byte portAndAction, byte keyCode); +static ZStatus_t zclApp_ReadWriteAuthCB(afAddrType_t *srcAddr, zclAttrRec_t *pAttr, uint8 oper); + +static void zclApp_Report(void); +static void zclApp_OneReport(void); +static void zclApp_ConfigInit(bool restart); + +static void zclApp_BtnClick(void); +static void zclApp_RingRun(void); +static void zclApp_RingEnd(void); + + +/********************************************************************* + * ZCL General Profile Callback table + */ +static zclGeneral_AppCallbacks_t zclApp_CmdCallbacks = { + zclApp_BasicResetCB, // Basic Cluster Reset command + NULL, // Identify Trigger Effect command + NULL, // On/Off cluster commands + NULL, // On/Off cluster enhanced command Off with Effect + NULL, // On/Off cluster enhanced command On with Recall Global Scene + NULL, // On/Off cluster enhanced command On with Timed Off + NULL, // RSSI Location command + NULL // RSSI Location Response command +}; +void zclApp_Init(byte task_id) { + HalLedSet(HAL_LED_ALL, HAL_LED_MODE_BLINK); + + zclApp_RestoreAttributesFromNV(); + + zclApp_TaskID = task_id; + + bdb_RegisterSimpleDescriptor(&zclApp_FirstEP); + + zclGeneral_RegisterCmdCallbacks(zclApp_FirstEP.EndPoint, &zclApp_CmdCallbacks); + + zcl_registerAttrList(zclApp_FirstEP.EndPoint, zclApp_AttrsCount, zclApp_AttrsFirstEP); + + zcl_registerReadWriteCB(zclApp_FirstEP.EndPoint, NULL, zclApp_ReadWriteAuthCB); + zcl_registerForMsg(zclApp_TaskID); + RegisterForKeys(zclApp_TaskID); + + LREP("Build %s \r\n", zclApp_DateCodeNT); + + zclApp_ConfigInit(TIMER_START); + #if defined( ZIC_BATTERY_MODE ) + ZMacSetTransmitPower(TX_PWR_PLUS_4); // set 4dBm + #endif +} +static void zclApp_HandleKeys(byte portAndAction, byte keyCode) { + LREP("zclApp_HandleKeys portAndAction=0x%X keyCode=0x%X\r\n", portAndAction, keyCode); + if (keyCode == 1) { + zclFactoryResetter_HandleKeys(portAndAction, keyCode); + } + zclCommissioning_HandleKeys(portAndAction, keyCode); + if (portAndAction & HAL_KEY_PRESS) { + if (keyCode == 1) { + LREPMaster("Key press\r\n"); + osal_start_reload_timer(zclApp_TaskID, APP_BTN_CLICK_EVT, 250); + } + else if (keyCode == 2) { + LREPMaster("Ring start\r\n"); + osal_start_reload_timer(zclApp_TaskID, APP_RING_RUN_EVT, 500); + } + } + if (portAndAction & HAL_KEY_RELEASE) { + #if defined( ZIC_BATTERY_MODE ) + zclBattery_Report(); + #endif + if (keyCode == 2) { + zclApp_RingEnd(); + } + } +} + + +uint16 zclApp_event_loop(uint8 task_id, uint16 events) { + LREP("events 0x%x \r\n", events); + if (events & SYS_EVENT_MSG) { + afIncomingMSGPacket_t *MSGpkt; + while ((MSGpkt = (afIncomingMSGPacket_t *)osal_msg_receive(zclApp_TaskID))) { + LREP("MSGpkt->hdr.event 0x%X clusterId=0x%X\r\n", MSGpkt->hdr.event, MSGpkt->clusterId); + switch (MSGpkt->hdr.event) { + case KEY_CHANGE: + zclApp_HandleKeys(((keyChange_t *)MSGpkt)->state, ((keyChange_t *)MSGpkt)->keys); + break; + + case ZCL_INCOMING_MSG: + if (((zclIncomingMsg_t *)MSGpkt)->attrCmd) { + osal_mem_free(((zclIncomingMsg_t *)MSGpkt)->attrCmd); + } + break; + + default: + break; + } + + // Release the memory + osal_msg_deallocate((uint8 *)MSGpkt); + } + // return unprocessed events + return (events ^ SYS_EVENT_MSG); + } + if (events & APP_REPORT_EVT) { + LREPMaster("APP_REPORT_EVT\r\n"); + zclApp_Report(); + return (events ^ APP_REPORT_EVT); + } + + if (events & APP_SAVE_ATTRS_EVT) { + LREPMaster("APP_SAVE_ATTRS_EVT\r\n"); + zclApp_SaveAttributesToNV(); + zclApp_ConfigInit(TIMER_RESTART); + return (events ^ APP_SAVE_ATTRS_EVT); + } + + if (events & APP_BTN_CLICK_EVT) { + LREPMaster("APP_BTN_CLICK_EVT\r\n"); + zclApp_BtnClick(); + return (events ^ APP_BTN_CLICK_EVT); + } + if (events & APP_RING_RUN_EVT) { + LREPMaster("APP_RING_RUN_EVT\r\n"); + zclApp_RingRun(); + return (events ^ APP_RING_RUN_EVT); + } + return 0; +} + + +static void zclApp_RingRun(void) { + + zclApp_State.RingRunStep++; + LREP("zclApp_State.RingRunStep %d\r\n", zclApp_State.RingRunStep); + LREP("zclApp_State.State %d\r\n", zclApp_State.State); + switch (zclApp_State.State) { + case Idle: + zclApp_State.State = Ring; + zclApp_OneReport(); + if (zclApp_Config.ModeOpen == Drop){ + zclApp_State.State = Droped; + HalLedSet(CATCH_PIN, HAL_LED_MODE_ON); + } + break; + case Ring: + if ((zclApp_Config.ModeOpen == Once) || (zclApp_Config.ModeOpen == Always)){ + if (zclApp_State.RingRunStep > (zclApp_Config.TimeRing * 2)) { + zclApp_State.State = Talk; + HalLedSet(CATCH_PIN, HAL_LED_MODE_ON); + HalLedSet(ANSWER_PIN, HAL_LED_MODE_ON); + zclApp_OneReport(); + } + } + break; + case Talk: + if ((zclApp_Config.ModeOpen == Once) || (zclApp_Config.ModeOpen == Always)){ + if (zclApp_State.RingRunStep > ((zclApp_Config.TimeRing + zclApp_Config.TimeTalk) * 2)) { + zclApp_State.State = Open; + HalLedSet(OPEN_PIN, HAL_LED_MODE_ON); + zclApp_OneReport(); + } + } + break; + case Open: + if ((zclApp_Config.ModeOpen == Once) || (zclApp_Config.ModeOpen == Always)){ + if (zclApp_State.RingRunStep > ((zclApp_Config.TimeRing + zclApp_Config.TimeTalk+ zclApp_Config.TimeOpen) * 2)) { + zclApp_RingEnd(); + } + } + break; + case Droped: + switch (zclApp_State.RingRunStep) { + case 2: + zclApp_OneReport(); + HalLedSet(ANSWER_PIN, HAL_LED_MODE_ON); + break; + case 3: + zclApp_RingEnd(); + break; + } + break; + } + +} + +static void zclApp_RingEnd(void) { + LREPMaster("Ring end\r\n"); + if (zclApp_Config.ModeSound == true) { + HalLedSet(CATCH_PIN, HAL_LED_MODE_OFF); + } + HalLedSet(ANSWER_PIN, HAL_LED_MODE_OFF); + HalLedSet(OPEN_PIN, HAL_LED_MODE_OFF); + osal_stop_timerEx(zclApp_TaskID, APP_RING_RUN_EVT); + osal_clear_event(zclApp_TaskID, APP_RING_RUN_EVT); + zclApp_State.RingRunStep = 0; + zclApp_State.State = Idle; + if (zclApp_Config.ModeOpen == Once) { + zclApp_Config.ModeOpen = Never; + } + zclApp_OneReport(); +} + +static void zclApp_BtnClick(void) { + + static uint8 currentBtnClickPhase = 0; + LREP("currentBtnClickPhase %d\r\n", currentBtnClickPhase); + switch (currentBtnClickPhase++) { + + case 0: + //HalLedSet(LED_PIN, HAL_LED_MODE_ON); + HAL_TURN_ON_LED1(); + if (zclApp_Config.ModeOpen < Drop) { + zclApp_Config.ModeOpen++; + } + else { + zclApp_Config.ModeOpen = Never; + } + break; + case 1: + zclApp_OneReport(); + break; + case 2: + //HalLedSet(LED_PIN, HAL_LED_MODE_OFF); + HAL_TURN_OFF_LED1(); + break; + default: + osal_stop_timerEx(zclApp_TaskID, APP_BTN_CLICK_EVT); + osal_clear_event(zclApp_TaskID, APP_BTN_CLICK_EVT); + currentBtnClickPhase = 0; + break; + } + +} + +static void zclApp_Report(void) { + zclApp_OneReport(); +} + +static void zclApp_OneReport(void) { + HalLedSet(LED_PIN, HAL_LED_MODE_BLINK); + bdb_RepChangedAttrValue(zclApp_FirstEP.EndPoint, ZCL_INTERCOM, ATTRID_MODEOPEN); +} + +static void zclApp_BasicResetCB(void) { + LREPMaster("BasicResetCB\r\n"); + zclApp_ResetAttributesToDefaultValues(); + zclApp_SaveAttributesToNV(); +} + +static ZStatus_t zclApp_ReadWriteAuthCB(afAddrType_t *srcAddr, zclAttrRec_t *pAttr, uint8 oper) { + LREPMaster("AUTH CB called\r\n"); + osal_start_timerEx(zclApp_TaskID, APP_SAVE_ATTRS_EVT, 2000); + return ZSuccess; +} + +static void zclApp_SaveAttributesToNV(void) { + uint8 writeStatus = osal_nv_write(NW_APP_CONFIG, 0, sizeof(application_config_t), &zclApp_Config); + LREP("Saving attributes to NV write=%d\r\n", writeStatus); +} + +static void zclApp_ConfigInit(bool restart) { + if (restart) { + LREP("Stop report timer event\r\n"); + osal_stop_timerEx(zclApp_TaskID, APP_REPORT_EVT); + osal_clear_event(zclApp_TaskID, APP_REPORT_EVT); + } + uint32 ReportInterval = (uint32)zclApp_Config.TimeReport * (uint32)60; + LREP("Start report with interval %d seconds\r\n", ReportInterval); + osal_start_reload_timer(zclApp_TaskID, APP_REPORT_EVT, ((uint32)ReportInterval*(uint32)1000)); + if (zclApp_Config.ModeSound == false) { + HalLedSet(CATCH_PIN, HAL_LED_MODE_ON); + } + else { + HalLedSet(CATCH_PIN, HAL_LED_MODE_OFF); + } +} + +static void zclApp_RestoreAttributesFromNV(void) { + uint8 status = osal_nv_item_init(NW_APP_CONFIG, sizeof(application_config_t), NULL); + LREP("Restoring attributes from NV status=%d \r\n", status); + if (status == NV_ITEM_UNINIT) { + uint8 writeStatus = osal_nv_write(NW_APP_CONFIG, 0, sizeof(application_config_t), &zclApp_Config); + LREP("NV was empty, writing %d\r\n", writeStatus); + } + if (status == ZSUCCESS) { + LREPMaster("Reading from NV\r\n"); + osal_nv_read(NW_APP_CONFIG, 0, sizeof(application_config_t), &zclApp_Config); + } +} + +/**************************************************************************** +****************************************************************************/ diff --git a/Source/zcl_app.h b/Source/zcl_app.h new file mode 100644 index 0000000..c709b98 --- /dev/null +++ b/Source/zcl_app.h @@ -0,0 +1,164 @@ +#ifndef ZCL_APP_H +#define ZCL_APP_H + +#ifdef __cplusplus +extern "C" { +#endif + +/********************************************************************* + * INCLUDES + */ +#include "version.h" +#include "zcl.h" + +/********************************************************************* + * CONSTANTS + */ +#define APP_REPORT_DELAY ((uint32)60 * (uint32)1000) // 1 minute +// Application Events +#define APP_REPORT_EVT 0x0001 +#define APP_SAVE_ATTRS_EVT 0x0002 +#define APP_BTN_CLICK_EVT 0x0004 +#define APP_RING_RUN_EVT 0x0008 + +/********************************************************************* + * MACROS + */ +#define NW_APP_CONFIG 0x0402 + +#define R ACCESS_CONTROL_READ +// ACCESS_CONTROL_AUTH_WRITE +#define RW (R | ACCESS_CONTROL_WRITE | ACCESS_CONTROL_AUTH_WRITE) +#define RR (R | ACCESS_REPORTABLE) + +//READ REPORT WRITE +#define RRW (R | ACCESS_REPORTABLE | ACCESS_CONTROL_WRITE | ACCESS_CONTROL_AUTH_WRITE) + +#define BASIC ZCL_CLUSTER_ID_GEN_BASIC +#define GEN_ON_OFF ZCL_CLUSTER_ID_GEN_ON_OFF +#define POWER_CFG ZCL_CLUSTER_ID_GEN_POWER_CFG + + + +//Intercom +#define ZCL_INTERCOM 0x0101 + +#define ATTRID_STATE 0x0050 +#define ATTRID_MODEOPEN 0x0051 +#define ATTRID_MODESOUND 0x0052 +#define ATTRID_TIMERING 0x0053 +#define ATTRID_TIMETALK 0x0054 +#define ATTRID_TIMEOPEN 0x0055 +#define ATTRID_TIMEREPORT 0x0056 + +#define LED_PIN HAL_LED_1 +#define CATCH_PIN HAL_LED_2 +#define ANSWER_PIN HAL_LED_3 +#define OPEN_PIN HAL_LED_4 + +#define TIMER_RESTART TRUE +#define TIMER_START FALSE + +#define ZIC_WORKMODE_NEVER 0 +#define ZIC_WORKMODE_ONCE 1 +#define ZIC_WORKMODE_ALWAYS 2 +#define ZIC_WORKMODE_DROP 3 + + +#define ZIC_WORKSTATE_IDLE 0 +#define ZIC_WORKSTATE_RING 1 +#define ZIC_WORKSTATE_TALK 2 +#define ZIC_WORKSTATE_OPEN 3 +#define ZIC_WORKSTATE_DROP 4 + +#define ZCL_UINT8 ZCL_DATATYPE_UINT8 +#define ZCL_UINT16 ZCL_DATATYPE_UINT16 +#define ZCL_INT16 ZCL_DATATYPE_INT16 +#define ZCL_INT8 ZCL_DATATYPE_INT8 +#define ZCL_INT32 ZCL_DATATYPE_INT32 +#define ZCL_UINT32 ZCL_DATATYPE_UINT32 +#define ZCL_SINGLE ZCL_DATATYPE_SINGLE_PREC +/********************************************************************* + * TYPEDEFS + */ + +typedef enum { + Never, + Once, + Always, + Drop +} WorkMode_t; + +typedef enum { + Idle, + Ring, + Talk, + Open, + Droped +} WorkState_t; + +typedef struct { + WorkMode_t ModeOpen; + uint8 ModeSound; + uint8 TimeRing; + uint8 TimeTalk; + uint8 TimeOpen; + uint8 TimeReport; +} application_config_t; + +typedef struct { + WorkState_t State; + uint8 RingRunStep; +} device_state_t; + + +/* +typedef enum { + UNKNOWN, SENSEAIR, MHZ19 +} SensorType_t; +*/ +/********************************************************************* + * VARIABLES + */ + +extern SimpleDescriptionFormat_t zclApp_FirstEP; +extern CONST zclAttrRec_t zclApp_AttrsFirstEP[]; +extern CONST uint8 zclApp_AttrsCount; + + +extern const uint8 zclApp_ManufacturerName[]; +extern const uint8 zclApp_ModelId[]; +extern const uint8 zclApp_PowerSource; + +extern uint8 zclApp_BatteryVoltage; +extern uint8 zclApp_BatteryPercentageRemainig; +extern uint16 zclApp_BatteryVoltageRawAdc; + +extern application_config_t zclApp_Config; +extern device_state_t zclApp_State; +// APP_TODO: Declare application specific attributes here + +/********************************************************************* + * FUNCTIONS + */ + +/* + * Initialization for the task + */ +extern void zclApp_Init(byte task_id); + +/* + * Event Process for the task + */ +extern UINT16 zclApp_event_loop(byte task_id, UINT16 events); + +extern void zclApp_ResetAttributesToDefaultValues(void); + +/********************************************************************* + *********************************************************************/ + +#ifdef __cplusplus +} +#endif + +#endif /* ZCL_APP_H */ diff --git a/Source/zcl_app_data.c b/Source/zcl_app_data.c new file mode 100644 index 0000000..5124ca1 --- /dev/null +++ b/Source/zcl_app_data.c @@ -0,0 +1,154 @@ +#include "AF.h" +#include "OSAL.h" +#include "ZComDef.h" +#include "ZDConfig.h" + +#include "zcl.h" +#include "zcl_general.h" +#include "zcl_ha.h" +#include "zcl_ms.h" + +#include "zcl_app.h" + +#include "battery.h" +#include "version.h" + +#include "bdb_touchlink.h" +#include "bdb_touchlink_target.h" +#include "stub_aps.h" + +/********************************************************************* + * CONSTANTS + */ + +#define APP_DEVICE_VERSION 2 +#define APP_FLAGS 0 + +#define APP_HWVERSION 1 +#define APP_ZCLVERSION 1 + +/********************************************************************* + * TYPEDEFS + */ + +/********************************************************************* + * MACROS + */ + +/********************************************************************* + * GLOBAL VARIABLES + */ + +// Global attributes +const uint16 zclApp_clusterRevision_all = 0x0002; + +// Basic Cluster +const uint8 zclApp_HWRevision = APP_HWVERSION; +const uint8 zclApp_ZCLVersion = APP_ZCLVERSION; + +const uint8 zclApp_ApplicationVersion = 3; +const uint8 zclApp_StackVersion = 4; + +//{lenght, 'd', 'a', 't', 'a'} +const uint8 zclApp_ManufacturerName[] = {6, 'x', 'y', 'z', 'r', 'o', 'e'}; +const uint8 zclApp_ModelId[] = {13, 'D', 'I', 'Y', '_', 'Z', 'i', 'n', 't', 'e', 'r', 'c', 'o', 'm'}; + +#if defined(ZIC_BATTERY_MODE) +const uint8 zclApp_PowerSource = POWER_SOURCE_BATTERY; +#define DEFAULT_TimeReport 30 //minutes +#else +const uint8 zclApp_PowerSource = POWER_SOURCE_DC; +#define DEFAULT_TimeReport 1 //minutes +#endif + +#define DEFAULT_ModeOpen Never +#define DEFAULT_ModeSound TRUE + +#define DEFAULT_TimeRing 3 //seconds to ring, before answer +#define DEFAULT_TimeTalk 1 //seconds to talk, before open +#define DEFAULT_TimeOpen 2 //seconds to hold open + + +application_config_t zclApp_Config = { + .ModeOpen = DEFAULT_ModeOpen, + .ModeSound = DEFAULT_ModeSound, + .TimeRing = DEFAULT_TimeRing, + .TimeTalk = DEFAULT_TimeTalk, + .TimeOpen = DEFAULT_TimeOpen, + .TimeReport = DEFAULT_TimeReport, +}; + +device_state_t zclApp_State = { + .State = Idle, + .RingRunStep = 0, +}; + + +/********************************************************************* + * ATTRIBUTE DEFINITIONS - Uses REAL cluster IDs + */ + +CONST zclAttrRec_t zclApp_AttrsFirstEP[] = { + {BASIC, {ATTRID_BASIC_APPL_VERSION, ZCL_UINT8, R, (void *)&zclApp_ApplicationVersion}}, + {BASIC, {ATTRID_BASIC_STACK_VERSION, ZCL_UINT8, R, (void *)&zclApp_StackVersion}}, + {BASIC, {ATTRID_BASIC_HW_VERSION, ZCL_UINT8, R, (void *)&zclApp_HWRevision}}, + {BASIC, {ATTRID_BASIC_ZCL_VERSION, ZCL_UINT8, R, (void *)&zclApp_ZCLVersion}}, + {BASIC, {ATTRID_BASIC_MANUFACTURER_NAME, ZCL_DATATYPE_CHAR_STR, R, (void *)zclApp_ManufacturerName}}, + {BASIC, {ATTRID_BASIC_MODEL_ID, ZCL_DATATYPE_CHAR_STR, R, (void *)zclApp_ModelId}}, + {BASIC, {ATTRID_BASIC_POWER_SOURCE, ZCL_DATATYPE_ENUM8, R, (void *)&zclApp_PowerSource}}, + {BASIC, {ATTRID_CLUSTER_REVISION, ZCL_UINT16, R, (void *)&zclApp_clusterRevision_all}}, + {BASIC, {ATTRID_BASIC_DATE_CODE, ZCL_DATATYPE_CHAR_STR, R, (void *)zclApp_DateCode}}, + {BASIC, {ATTRID_BASIC_SW_BUILD_ID, ZCL_DATATYPE_CHAR_STR, R, (void *)zclApp_DateCode}}, + +#if defined(ZIC_BATTERY_MODE) + {POWER_CFG, {ATTRID_POWER_CFG_BATTERY_VOLTAGE, ZCL_UINT8, RR, (void *)&zclBattery_Voltage}}, +/** + * FYI: calculating battery percentage can be tricky, since this device can be powered from 2xAA or 1xCR2032 batteries + * */ + {POWER_CFG, {ATTRID_POWER_CFG_BATTERY_PERCENTAGE_REMAINING, ZCL_UINT8, RR, (void *)&zclBattery_PercentageRemainig}}, +#endif + {ZCL_INTERCOM, {ATTRID_STATE, ZCL_DATATYPE_ENUM8, RRW, (void *)&zclApp_State.State}}, + + {ZCL_INTERCOM, {ATTRID_MODEOPEN, ZCL_DATATYPE_ENUM8, RRW, (void *)&zclApp_Config.ModeOpen}}, + {ZCL_INTERCOM, {ATTRID_MODESOUND, ZCL_DATATYPE_BOOLEAN, RRW, (void *)&zclApp_Config.ModeSound}}, + + {ZCL_INTERCOM, {ATTRID_TIMERING, ZCL_UINT8, RW, (void *)&zclApp_Config.TimeRing}}, + {ZCL_INTERCOM, {ATTRID_TIMETALK, ZCL_UINT8, RW, (void *)&zclApp_Config.TimeTalk}}, + {ZCL_INTERCOM, {ATTRID_TIMEOPEN, ZCL_UINT8, RW, (void *)&zclApp_Config.TimeOpen}}, + {ZCL_INTERCOM, {ATTRID_TIMEREPORT, ZCL_UINT8, RW, (void *)&zclApp_Config.TimeReport}}, +}; + + +uint8 CONST zclApp_AttrsCount = (sizeof(zclApp_AttrsFirstEP) / sizeof(zclApp_AttrsFirstEP[0])); + +const cId_t zclApp_InClusterList[] = {ZCL_CLUSTER_ID_GEN_BASIC}; + +#define APP_MAX_INCLUSTERS (sizeof(zclApp_InClusterList) / sizeof(zclApp_InClusterList[0])) + +const cId_t zclApp_OutClusterList[] = {ZCL_INTERCOM}; + + +#define APP_MAX_OUT_CLUSTERS (sizeof(zclApp_OutClusterList) / sizeof(zclApp_OutClusterList[0])) + + +SimpleDescriptionFormat_t zclApp_FirstEP = { + 1, // int Endpoint; + ZCL_HA_PROFILE_ID, // uint16 AppProfId[2]; + ZCL_HA_DEVICEID_SIMPLE_SENSOR, // uint16 AppDeviceId[2]; + APP_DEVICE_VERSION, // int AppDevVer:4; + APP_FLAGS, // int AppFlags:4; + APP_MAX_INCLUSTERS, // byte AppNumInClusters; + (cId_t *)zclApp_InClusterList, // byte *pAppInClusterList; + APP_MAX_OUT_CLUSTERS, // byte AppNumInClusters; + (cId_t *)zclApp_OutClusterList // byte *pAppInClusterList; +}; + + +void zclApp_ResetAttributesToDefaultValues(void) { + zclApp_Config.ModeOpen = DEFAULT_ModeOpen; + zclApp_Config.ModeSound = DEFAULT_ModeSound; + zclApp_Config.TimeRing = DEFAULT_TimeRing; + zclApp_Config.TimeTalk = DEFAULT_TimeTalk; + zclApp_Config.TimeOpen = DEFAULT_TimeOpen; + zclApp_Config.TimeReport = DEFAULT_TimeReport; +} \ No newline at end of file diff --git a/converters/DIY_Zintercom.js b/converters/DIY_Zintercom.js new file mode 100644 index 0000000..7d2a347 --- /dev/null +++ b/converters/DIY_Zintercom.js @@ -0,0 +1,296 @@ +const { + fromZigbeeConverters, + toZigbeeConverters, + exposes +} = require('zigbee-herdsman-converters'); + +const e = exposes.presets; + +const ZCL_DATATYPE_INT16 = 0x29; +const ZCL_DATATYPE_UINT8 = 0x20; +const ZCL_DATATYPE_UINT16 = 0x21; +const ZCL_DATATYPE_BOOLEAN = 0x10; +const ZCL_DATATYPE_INT32 = 0x2b; +const bind = async (endpoint, target, clusters) => { + for (const cluster of clusters) { + await endpoint.bind(cluster, target); + } +}; + +const configureReporting = { + currentPositionLiftPercentage: async (endpoint, overrides) => { + const payload = configureReportingPayload('currentPositionLiftPercentage', 1, repInterval.MAX, 1, overrides); + await endpoint.configureReporting('closuresWindowCovering', payload); + }, + batteryPercentageRemaining: async (endpoint, overrides) => { + const payload = configureReportingPayload( + 'batteryPercentageRemaining', repInterval.HOUR, repInterval.MAX, 0, overrides, + ); + await endpoint.configureReporting('genPowerCfg', payload); + }, + batteryVoltage: async (endpoint, overrides) => { + const payload = configureReportingPayload('batteryVoltage', repInterval.HOUR, repInterval.MAX, 0, overrides); + await endpoint.configureReporting('genPowerCfg', payload); + }, +} + +const configureReportingPayload = (attribute, min, max, change, overrides) => { + const payload = { + attribute: attribute, + minimumReportInterval: min, + maximumReportInterval: max, + reportableChange: change, + }; + + + if (overrides) { + if (overrides.hasOwnProperty('min')) payload.minimumReportInterval = overrides.min; + if (overrides.hasOwnProperty('max')) payload.maximumReportInterval = overrides.max; + if (overrides.hasOwnProperty('change')) payload.reportableChange = overrides.change; + } + + return [payload]; +}; + +const repInterval = { + MAX: 62000, + HOUR: 3600, + MINUTES_30: 1800, + MINUTES_15: 900, + MINUTES_10: 600, + MINUTES_5: 300, + MINUTE: 60, +}; +//const ACCESS_STATE = 0b001, ACCESS_WRITE = 0b010, ACCESS_READ = 0b100; + +const hass = { + co2: { + type: 'sensor', + object_id: 'co2', + discovery_payload: { + unit_of_measurement: 'ppm', + icon: 'mdi:molecule-co2', + value_template: '{{ value_json.co2 }}', + }, + }, + temperature: { + type: 'sensor', + object_id: 'temperature', + discovery_payload: { + unit_of_measurement: '°C', + device_class: 'temperature', + value_template: '{{ value_json.temperature }}', + }, + }, + humidity: { + type: 'sensor', + object_id: 'humidity', + discovery_payload: { + unit_of_measurement: '%', + device_class: 'humidity', + value_template: '{{ value_json.humidity }}', + }, + }, + presure: { + type: 'sensor', + object_id: 'pressure', + discovery_payload: { + unit_of_measurement: 'hPa', + device_class: 'pressure', + value_template: '{{ value_json.pressure }}', + }, + } +}; + + + +const fz = { + diy_zintercom_config: { + cluster: 'closuresDoorLock', + type: ['attributeReport', 'readResponse'], + convert: (model, msg, publish, options, meta) => { + const result = {}; + if (msg.data.hasOwnProperty(0x0050)) { + result.state = ['Idle', 'Ring', 'Talk', 'Open', 'Drop'][msg.data[0x0050]]; + } + if (msg.data.hasOwnProperty(0x0051)) { + result.mode_open = ['Never', 'Once', 'Always', 'Drop'][msg.data[0x0051]]; + } + if (msg.data.hasOwnProperty(0x0052)) { + result.mode_sound = ['OFF', 'ON'][msg.data[0x0052]]; + } + if (msg.data.hasOwnProperty(0x0053)) { + result.time_ring = msg.data[0x0053]; + } + if (msg.data.hasOwnProperty(0x0054)) { + result.time_talk = msg.data[0x0054]; + } + if (msg.data.hasOwnProperty(0x0055)) { + result.time_open = msg.data[0x0055]; + } + if (msg.data.hasOwnProperty(0x0056)) { + result.time_report = msg.data[0x0056]; + } + return result; + }, + }, +} + +const tz = { + diy_zintercom_config: { + key: ['state', 'mode_open', 'mode_sound', 'time_ring', 'time_talk', 'time_open', 'time_report'], + convertSet: async (entity, key, rawValue, meta) => { + const lookup = { + 'OFF': 0x00, + 'ON': 0x01, + }; + const modeOpenLookup = { + 'Never': '0', + 'Once': '1', + 'Always': '2', + 'Drop': '3', + }; + + + let value = lookup.hasOwnProperty(rawValue) ? lookup[rawValue] : parseInt(rawValue, 10); + + if (key == 'mode_open') { + value = modeOpenLookup.hasOwnProperty(rawValue) ? modeOpenLookup[rawValue] : parseInt(rawValue, 10); + } + + const payloads = { + mode_open: {0x0051: {value, type: 0x30}}, + mode_sound: {0x0052: {value, type: 0x10}}, + time_ring: {0x0053: {value, type: 0x20}}, + time_talk: {0x0054: {value, type: 0x20}}, + time_open: {0x0055: {value, type: 0x20}}, + time_report: {0x0056: {value, type: 0x20}}, + }; + + await entity.write('closuresDoorLock', payloads[key]); + return { + state: {[key]: rawValue}, + }; + }, + convertGet: async (entity, key, meta) => { + const payloads = { + state: ['closuresDoorLock', 0x0050], + mode_open: ['closuresDoorLock', 0x0051], + mode_sound: ['closuresDoorLock', 0x0052], + time_ring: ['closuresDoorLock', 0x0053], + time_talk: ['closuresDoorLock', 0x0054], + time_open: ['closuresDoorLock', 0x0055], + time_report: ['closuresDoorLock', 0x0056], + }; + await entity.read(payloads[key][0], [payloads[key][1]]); + }, + }, +} + +const device = { + zigbeeModel: ['DIY_Zintercom'], + model: 'DIY_Zintercom', + vendor: 'xyzroe', + description: '[Intercom Auto Opener]', + supports: '', + //homeassistant: [hass.temperature, hass.presure, hass.humidity, hass.co2], + fromZigbee: [ + /* + fromZigbeeConverters.temperature, + fromZigbeeConverters.humidity, + fromZigbeeConverters.co2, + fromZigbeeConverters.pressure, + */ + fromZigbeeConverters.battery, + fz.diy_zintercom_config, + ], + toZigbee: [ + toZigbeeConverters.factory_reset, + tz.diy_zintercom_config, + ], + meta: { + configureKey: 1, + }, + configure: async (device, coordinatorEndpoint) => { + const firstEndpoint = device.getEndpoint(1); + + //await bind(firstEndpoint, coordinatorEndpoint, ['msCO2', 'closuresDoorLock', 'genOnOff']); + + await bind(firstEndpoint, coordinatorEndpoint, ['closuresDoorLock', 'genPowerCfg']); + const overides = {min: 0, max: 3600, change: 0}; + await configureReporting.batteryVoltage(firstEndpoint, overides); + await configureReporting.batteryPercentageRemaining(firstEndpoint, overides); +/* + if (device.applicationVersion < 3) { // Legacy PM2 firmwares + const payload = [{ + attribute: 'batteryPercentageRemaining', + minimumReportInterval: 0, + maximumReportInterval: 3600, + reportableChange: 0, + }, { + attribute: 'batteryVoltage', + minimumReportInterval: 0, + maximumReportInterval: 3600, + reportableChange: 0, + }]; + await firstEndpoint.configureReporting('genPowerCfg', payload); + } + */ +/* + const msBindPayload = [{ + attribute: 'measuredValue', + minimumReportInterval: 0, + maximumReportInterval: 3600, + reportableChange: 0, + }]; + await firstEndpoint.configureReporting('msCO2', msBindPayload); +*/ + + const payload = [{ + attribute: { + ID: 0x0050, + type: 0x30, + }, + minimumReportInterval: 0, + maximumReportInterval: 3600, + reportableChange: 0, + }, + ]; + await firstEndpoint.configureReporting('closuresDoorLock', payload); + /**/ + /* + await firstEndpoint.configureReporting('msTemperatureMeasurement', msBindPayload); + await firstEndpoint.configureReporting('msRelativeHumidity', msBindPayload); + + const pressureBindPayload = [{ + attribute: 'scaledValue', + minimumReportInterval: 0, + maximumReportInterval: 3600, + reportableChange: 0, + }]; + await firstEndpoint.configureReporting('msPressureMeasurement', pressureBindPayload); + */ + + + }, + exposes: [ + //exposes.numeric('co2', ACCESS_STATE).withUnit('ppm'), + e.battery(), + exposes.enum('state', exposes.access.STATE_GET, ['Idle', 'Ring', 'Talk', 'Open', 'Drop']) + .withDescription('Current state'), + exposes.enum('mode_open', exposes.access.ALL, ['Never', 'Once', 'Always', 'Drop']) + .withDescription('Auto open mode'), + exposes.binary('mode_sound', exposes.access.ALL, 'ON', 'OFF') + .withDescription('Sound mode'), + exposes.numeric('time_ring', exposes.access.ALL).withUnit('sec') + .withDescription('Time to ring'), + exposes.numeric('time_talk', exposes.access.ALL).withUnit('sec') + .withDescription('Time to "speak" before open'), + exposes.numeric('time_open', exposes.access.ALL).withUnit('sec') + .withDescription('Time to "hold open button"'), + exposes.numeric('time_report', exposes.access.ALL).withUnit('min') + .withDescription('Reporting interval'), + ], +}; + +module.exports = device; diff --git a/ver.py b/ver.py new file mode 100644 index 0000000..8add519 --- /dev/null +++ b/ver.py @@ -0,0 +1,30 @@ +from datetime import datetime +from os.path import dirname, join +cwd = dirname(__file__) +now = datetime.now() +dt_string = now.strftime("%d/%m/%Y %H:%M") +print("date and time =", dt_string) +with open(join(cwd, './Source/version.c'), 'w') as f: + chars = ["'{0}'".format(char) for char in dt_string] + f.write(""" + #ifndef ZCL_APP_VERSION_H + #define ZCL_APP_VERSION_H + + #ifdef __cplusplus + extern "C" { + #endif + + """ + ) + f.write('#include "version.h"\n') + code = """const uint8 zclApp_DateCode[] = {{ {0}, {1} }};\n""".format(len(chars), ', '.join(chars)) + f.write(code) + code = """const char zclApp_DateCodeNT[] = \"{0}\";\n""".format(dt_string) + f.write(code) + f.write(""" + #ifdef __cplusplus + } + #endif + + #endif /* ZCL_APP_VERSION_H */ + """) \ No newline at end of file