From 7994aead0c8e0db6a25424049516a76d411e4620 Mon Sep 17 00:00:00 2001 From: John Doe Date: Sat, 7 Aug 2021 00:05:37 +0800 Subject: [PATCH] Update README.md --- README.md | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) diff --git a/README.md b/README.md index 31df746..5261cc4 100644 --- a/README.md +++ b/README.md @@ -7,21 +7,21 @@ Follow this article https://zigdevwiki.github.io/Begin/IAR_install/ This device is designed to control the matrix intercom using Zigbee. Using zigbee2mqtt you can: -1. Receive notification when the intercom rings. (also support **direct bind**) +1. Receive a notification when the intercom rings. (also support **direct bind**) 2. Mute the sound on the intercom handset. 3. Automatically or manually open the door or hang up when the intercom rings. There are 4 work modes: -1. `Never` - ordinary work mode, use handset to control -2. `Once` - one time open door when intercom rings +1. `Never` - ordinary work mode, use a handset to control +2. `Once` - one-time open door when intercom rings 3. `Always` - open door when intercom rings -4. `Drop` - hangs up all intercom rings, right after start +4. `Drop` - hangs up all intercom rings, right after the start -You can change the operating mode uisng z2m or by short press the button. (< 1000ms) +You can change the operating mode using z2m or by short press the button. (< 1000ms) After pressing the button, the LED will flash at 4 Hz. The number of flashes indicates the current operating mode. -You can control sound mode using z2m or by long press the button. (1000ms < X < 5000ms) +You can control sound mode using z2m or by long-press the button. (1000ms < X < 5000ms) After pressing the button, the LED will flash at 1.5 Hz. One flash - OFF, two flashes - ON. @@ -37,7 +37,7 @@ Just plug by swapping. #### 2 The problem of cross-calls to other apartments: -it was revealed that the intercom circuit is closed through the reverse diode of the u2 transitor (thanks to @Alex_AW) +it was revealed that the intercom circuit is closed through the reverse diode of the u2 transistor (thanks to @Alex_AW) to prevent it, you need to add a diode according to the diagram: ![](/images/fix_error_rings.png) @@ -47,8 +47,8 @@ If you want to use the battery version without a handset, do not turn off the so ### How to join -Reset to FN by reboot device 5 times with interval less than 10 seconds. -Reset to FN by press and hold BTN for 5 seconds. +Reset to FN by reboot the device 5 times with intervals of less than 10 seconds. +Reset to FN by pressing and holding BTN for 5 seconds. LED will flash during reset. @@ -95,7 +95,7 @@ Install `E18-MS1-PCB` only! Do not turn off `sound` because it turns U2 forever, which will drain the battery much faster. Since the device is in sleep mode, it cannot receive commands. -But you have the ability to set the button mode or at the time of the call. +But you can set the button mode or at the time of the call. If any commands are in the coordinator's queue, they will be executed after a button is pressed or a call is received. @@ -104,7 +104,7 @@ If any commands are in the coordinator's queue, they will be executed after a bu ##### The mode set by the Zigbee command `overwrites` the mode set by the button. ### Binding -The device supports direct binding of an incoming call to the onOff cluster. +The device supports the direct binding of an incoming call to the onOff cluster. For example, you can turn on the light while a call comes to the intercom, for notification in mute mode.