Create FUNDING.yml

Support RGB Led and One Led, some small fixes, add RBG scheme and Gerber files

.github/FUNDING.yml

@@ -0,0 +1,14 @@
+# These are supported funding model platforms
+
+github: xyzroe
+patreon: # Replace with a single Patreon username
+open_collective: # Replace with a single Open Collective username
+ko_fi: # Replace with a single Ko-fi username
+tidelift: # Replace with a single Tidelift platform-name/package-name e.g., npm/babel
+community_bridge: # Replace with a single Community Bridge project-name e.g., cloud-foundry
+liberapay: # Replace with a single Liberapay username
+issuehunt: # Replace with a single IssueHunt username
+lfx_crowdfunding: # Replace with a single LFX Crowdfunding project-name e.g., cloud-foundry
+polar: # Replace with a single Polar username
+buy_me_a_coffee: xyzroe
+custom: # Replace with up to 4 custom sponsorship URLs e.g., ['link1', 'link2']

README-RGB.md

@@ -0,0 +1,36 @@
+# Zintercom
+
+## Firmware options
+Each firmware version has 6 variants.
+For different zigbee modules and power supply.
+
+- EndDevice - for battery power
+- Router - for external power
+
+
+- PA1 - for E18-MS1PA1 module
+- PA2 - for E18-MS1PA2 module
+- no suffix - for E18-MS1 module
+
+## Using battery as power supply
+The firmware for the battery has the following differences.
+- The device is mostly asleep.
+- Wakes up once every 30 minutes (parameter - time_report) and sends a report.
+- Zigbee commands are only executed when the device wakes up.
+- RGB lights up for 2 seconds after changing the mode with the button.
+- When the "no sound" mode is turned on, the constant consumption is 3 mA. In this mode AAA batteries will last 1-2 months.
+
+## RGB Software
+Release 2.0.0 support new RGB hardware and legacy hardware with one Led.
+
+## RGB Hardware
+Schematics and PCB - https://oshwlab.com/Utyf/zcom
+
+![](hardware/Schematic_Zintercom_rgb.png)
+
+![](images/front_side_rgb.png)
+
+
+### Files to reproduce
+* [Gerbers](https://github.com/diyruz/Zintercom/tree/master/hardware)  
+* [Firmware](https://github.com/diyruz/Zintercom/releases)  

README.md

@@ -1,4 +1,7 @@
 # Zintercom
+[![GitHub version](https://img.shields.io/github/release/xyzroe/Zintercom.svg)](https://github.com/xyzroe/Zintercom/releases)
+[![GitHub download](https://img.shields.io/github/downloads/xyzroe/Zintercom/total.svg)](https://github.com/xyzroe/Zintercom/latest)
+[![License](https://img.shields.io/github/license/xyzroe/Zintercom.svg)](LICENSE.txt)
 
 ## How to compile
 Follow this article https://zigdevwiki.github.io/Begin/IAR_install/
@@ -25,6 +28,14 @@ You can control sound mode using z2m or by long-press the button. (1000ms < X <
 After pressing the button, the LED will flash at 1.5 Hz.  
 One flash - OFF, two flashes - ON.  
 
+## Hardware v2.0
+New version of the board with RGB led support.  
+All known bugs and shortcomings have been fixed.  
+Thanks [@Utyff](https://github.com/Utyff)
+### [More info](https://github.com/diyruz/Zintercom/blob/master/README-RGB.md)
+  
+  
+  
   
   
 ## Important info
@@ -116,6 +127,10 @@ For example, you can turn on the light while a call comes to the intercom, for n
 
 ![](https://cdn.thingiverse.com/assets/0b/2f/09/d3/37/large_display_2021-05-22_22-55-43.JPG)
 
+### Like ♥️?
+[!["Buy Me A Coffee"](https://www.buymeacoffee.com/assets/img/custom_images/orange_img.png)](https://www.buymeacoffee.com/xyzroe)
+
+
 ### Inspired by
 The original scheme of the intercom opener by [Alexander Vaidurov](https://easyeda.com/Alex_AW/domofon-with-battery)  
 Various hardware solutions by [Jager](https://modkam.ru)  

converters/DIYRuZ_Zintercom.js

@@ -1,11 +1,12 @@
-const {
+const zigbeeHerdsmanConverters = require('zigbee-herdsman-converters');
-    fromZigbeeConverters,
+
-    toZigbeeConverters,
+const exposes = zigbeeHerdsmanConverters['exposes'] || require("zigbee-herdsman-converters/lib/exposes");
-    exposes
-} = require('zigbee-herdsman-converters');
 
 const ep = exposes.presets;
 const ea = exposes.access;
+const fromZigbeeConverters = zigbeeHerdsmanConverters.fromZigbeeConverters || zigbeeHerdsmanConverters.fromZigbee;
+const toZigbeeConverters = zigbeeHerdsmanConverters.toZigbeeConverters || zigbeeHerdsmanConverters.toZigbee;
+
 
 const bind = async (endpoint, target, clusters) => {
     for (const cluster of clusters) {
@@ -14,6 +15,10 @@ const bind = async (endpoint, target, clusters) => {
 };
 
 const configureReporting = {
+    currentPositionLiftPercentage: async (endpoint, overrides) => {
+        const payload = configureReportingPayload('currentPositionLiftPercentage', 1, repInterval.MAX, 1, overrides);
+        await endpoint.configureReporting('closuresWindowCovering', payload);
+    },
     batteryPercentageRemaining: async (endpoint, overrides) => {
         const payload = configureReportingPayload(
             'batteryPercentageRemaining', repInterval.HOUR, repInterval.MAX, 0, overrides,
@@ -65,18 +70,6 @@ const fz = {
           }
           if (msg.data.hasOwnProperty(0x0051)) {
               result.mode = ['Never', 'Once', 'Always', 'Drop'][msg.data[0x0051]];
-              result.once = 'OFF';
-              result.always = 'OFF';
-              result.drop = 'OFF';
-              if (msg.data[0x0051] == 1) {
-                result.once = 'ON';
-              }
-              if (msg.data[0x0051] == 2) {
-                result.always = 'ON';
-              }
-              if (msg.data[0x0051] == 3) {
-                result.drop = 'ON';
-              }
           }
           if (msg.data.hasOwnProperty(0x0052)) {
               result.sound = ['OFF', 'ON'][msg.data[0x0052]];
@@ -103,11 +96,11 @@ const fz = {
 
 const tz = {
   diy_zintercom_config: {
-      key: ['state', 'mode', 'sound', 'once', 'always', 'drop', 'time_ring', 'time_talk', 'time_open', 'time_bell', 'time_report'],
+      key: ['state', 'mode', 'sound', 'time_ring', 'time_talk', 'time_open', 'time_bell', 'time_report'],
       convertSet: async (entity, key, rawValue, meta) => {
           const lookup = {
-              'OFF': '0',
+              'OFF': 0x00,
-              'ON': '1',
+              'ON': 0x01,
           };
           const modeOpenLookup = {
               'Never': '0',
@@ -123,24 +116,9 @@ const tz = {
               value = modeOpenLookup.hasOwnProperty(rawValue) ? modeOpenLookup[rawValue] : parseInt(rawValue, 10);
           }
 
-          if (key == 'once') {
-              value = (rawValue == 'ON') ? 1 : 0;
-          }
-
-          if (key == 'always') {
-              value = (rawValue == 'ON') ? 2 : 0;
-          }
-
-          if (key == 'drop') {
-              value = (rawValue == 'ON') ? 3 : 0;
-          }
-
           const payloads = {
               mode: {0x0051: {value, type: 0x30}},
               sound: {0x0052: {value, type: 0x10}},
-              once: {0x0051: {value, type: 0x30}},
-              always: {0x0051: {value, type: 0x30}},
-              drop: {0x0051: {value, type: 0x30}},
               time_ring: {0x0053: {value, type: 0x20}},
               time_talk: {0x0054: {value, type: 0x20}},
               time_open: {0x0055: {value, type: 0x20}},
@@ -149,17 +127,6 @@ const tz = {
           };
 
           await entity.write('closuresDoorLock', payloads[key]);
-
-          if (key == 'once' || key == 'always' || key == 'drop' || key == 'mode') {
-              const payloads = {
-                  mode: ['closuresDoorLock', 0x0051],
-                  once: ['closuresDoorLock', 0x0051],
-                  always: ['closuresDoorLock', 0x0051],
-                  drop: ['closuresDoorLock', 0x0051],
-              };
-              await entity.read(payloads[key][0], [payloads[key][1]]);
-          }
-
           return {
               state: {[key]: rawValue},
           };
@@ -169,9 +136,6 @@ const tz = {
               state: ['closuresDoorLock', 0x0050],
               mode: ['closuresDoorLock', 0x0051],
               sound: ['closuresDoorLock', 0x0052],
-              once: ['closuresDoorLock', 0x0051],
-              always: ['closuresDoorLock', 0x0051],
-              drop: ['closuresDoorLock', 0x0051],
               time_ring: ['closuresDoorLock', 0x0053],
               time_talk: ['closuresDoorLock', 0x0054],
               time_open: ['closuresDoorLock', 0x0055],
@@ -229,12 +193,6 @@ const device = {
             .withDescription('Select open mode'),
         exposes.binary('sound', ea.ALL, 'ON', 'OFF').withProperty('sound')
             .withDescription('Enable or disable sound'),
-        exposes.binary('once', ea.ALL, 'ON', 'OFF').withProperty('once')
-            .withDescription('Enable or disable once mode'),
-        exposes.binary('always', ea.ALL, 'ON', 'OFF').withProperty('always')
-            .withDescription('Enable or disable always mode'),
-        exposes.binary('drop', ea.ALL, 'ON', 'OFF').withProperty('drop')
-            .withDescription('Enable or disable drop mode'),
         exposes.numeric('time_ring', ea.ALL).withUnit('sec')
             .withDescription('Time to ring before answer'),
         exposes.numeric('time_talk', ea.ALL).withUnit('sec')