mirror of
https://github.com/Utyff/Zintercom.git
synced 2026-01-12 17:27:42 +03:00
88 lines
2.8 KiB
Markdown
88 lines
2.8 KiB
Markdown
# Zintercom
|
|
##### Zigbee Intercom Automator
|
|
This device is designed to control the matrix intercom using Zigbee.
|
|
|
|
Using zigbee2mqtt you can:
|
|
1. Receive notification when the intercom rings. (also support **direct bind**)
|
|
2. Mute the sound on the intercom handset.
|
|
3. Automatically or manually open the door or hang up when the intercom rings.
|
|
|
|
There are 4 work modes:
|
|
1. `Never` - ordinary work mode, use handset to control
|
|
2. `Once` - one time open door when intercom rings
|
|
3. `Always` - open door when intercom rings
|
|
4. `Drop` - hangs up all intercom rings, right after start
|
|
|
|
You can change the operating mode with z2m or by pressing the button.
|
|
After pressing the button, the LED will flash.
|
|
The number of flashes indicates the current operating mode.
|
|
|
|
### How to join
|
|
Reset to FN by reboot device 5 times with interval less than 10 seconds.
|
|
Reset to FN by press and hold BTN for 5 seconds.
|
|
|
|
LED will flash during reset.
|
|
|
|
|
|
|
|
|
|
### How to add device into zigbe2mqtt
|
|
Use [external converters](https://www.zigbee2mqtt.io/information/configuration.html#external-converters-configuration) feature
|
|
|
|
Converter file located [here](https://github.com/diyruz/Zintercom/blob/master/converters/DIYRuZ_Zintercom.js)
|
|
|
|
|
|
|
|
### Schematic
|
|
|
|
|
|
|
|
|
|
### PCB size
|
|
|
|
`57.5mm x 27.3mm`
|
|
|
|
|
|
|
|
### DC Power
|
|
|
|
Support `router` and `end device` modes.
|
|
Install `E18-MS1PA1`, `E18-MS1PA2` or `E18-MS1-PCB`.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
### Battery Power
|
|
|
|
Support only `end device` mode.
|
|
Install `E18-MS1-PCB` only!
|
|
|
|
Do not turn off `sound` because it turns U2 forever, which will drain the battery much faster.
|
|
|
|
Since the device is in sleep mode, it cannot receive commands.
|
|
But you have the ability to set the button mode or at the time of the call.
|
|
|
|
If any commands are in the coordinator's queue, they will be executed after a button is pressed or a call is received.
|
|
|
|
|
|
|
|
##### The mode set by the Zigbee command `overwrites` the mode set by the button.
|
|
|
|
### Binding
|
|
The device supports direct binding of an incoming call to the onOff cluster.
|
|
|
|
For example, you can turn on the light while a call comes to the intercom, for notification in mute mode.
|
|
|
|
|
|
### Files to reproduce
|
|
* [Gerbers and BOM](https://github.com/diyruz/Zintercom/tree/master/hardware) by [xyzroe](https://t.me/xyzroe)
|
|
* [Firmware](https://github.com/diyruz/Zintercom/releases) by [xyzroe](https://t.me/xyzroe)
|
|
|
|
|
|
### Inspired by
|
|
The original scheme of the intercom opener by [Alexander Vaidurov](https://easyeda.com/Alex_AW/domofon-with-battery)
|
|
Various hardware solutions by [Jager](https://modkam.ru)
|
|
Firmware for different Zigbee devices by [Anonymous](https://github.com/nurikk/)
|