mirror of
https://github.com/Utyff/Zintercom.git
synced 2026-01-12 17:27:42 +03:00
42 lines
1.0 KiB
Markdown
42 lines
1.0 KiB
Markdown
# Zintercom
|
|
## Zigbee Intercom Automator
|
|
|
|
### How to join
|
|
Reset to FN by reboot device 5 times with interval less than 10 seconds.
|
|
Reset to FN by press and hold BTN for 5 seconds.
|
|
|
|
LED will flash during reset.
|
|
|
|
|
|
### How to add device into zigbe2mqtt
|
|
Use [external converters](https://www.zigbee2mqtt.io/information/configuration.html#external-converters-configuration) feature
|
|
|
|
Converter file located [here](./converters/DIY_Zintercom.js)
|
|
|
|
### Schematic
|
|
|
|
<img src="./images/Schematic_Zintercom.png" width="90%">
|
|
|
|
|
|
### PCB size
|
|
|
|
`57.5mm x 27.3mm`
|
|
<img src="./images/dimensions.png" width="60%">
|
|
|
|
|
|
### DC Power
|
|
|
|
Support `router` and `end device` modes.
|
|
Install `E18-MS1PA1`, `E18-MS1PA2` or `E18-MS1-PCB`.
|
|
<img src="./images/front_side.png" width="70%">
|
|
<img src="./images/back_DC_5-9V.png" width="35%">
|
|
<img src="./images/back_microUSB.png" width="35%">
|
|
|
|
|
|
### Battery Power
|
|
|
|
Support only `end device` mode.
|
|
Install `E18-MS1-PCB` only!
|
|
<img src="./images/back_2xAAA.png" width="35%">
|
|
<img src="./images/back_CR2032.png" width="35%">
|