Merge pull request #6 from Utyff/Utyf

fix button hold

CC2530DB/GenericApp.ewp

@@ -142,11 +142,11 @@
                 <option>
                     <name>Input variant</name>
                     <version>2</version>
-                    <state>0</state>
+                    <state>5</state>
                 </option>
                 <option>
                     <name>Input description</name>
-                    <state>Automatic choice of formatter.</state>
+                    <state>No float.</state>
                 </option>
                 <option>
                     <name>Output variant</name>
@@ -1284,11 +1284,11 @@
                 <option>
                     <name>Input variant</name>
                     <version>2</version>
-                    <state>0</state>
+                    <state>5</state>
                 </option>
                 <option>
                     <name>Input description</name>
-                    <state>Automatic choice of formatter.</state>
+                    <state>No float.</state>
                 </option>
                 <option>
                     <name>Output variant</name>
@@ -1604,7 +1604,7 @@
                 <option>
                     <name>Compiler Extra Options Edit</name>
                     <state>-f $PROJ_DIR$\..\..\..\Tools\CC2530DB\f8wRouter.cfg</state>
-                    <state>-f $PROJ_DIR$\..\..\..\Tools\CC2530DB\f8wConfig.cfg</state>
+                    <state>-f $PROJ_DIR$\..\zstack-lib\f8wConfig.cfg</state>
                     <state>-f $PROJ_DIR$\..\..\..\Tools\CC2530DB\f8wZCL.cfg</state>
                 </option>
                 <option>
@@ -3704,7 +3704,7 @@
                 </option>
                 <option>
                     <name>OGChipConfigPath</name>
-                    <state>$TOOLKIT_DIR$\config\devices\Texas Instruments\CC2530F256.i51</state>
+                    <state>$TOOLKIT_DIR$\config\devices\Texas Instruments\CC25xx\3x\CC2530F256.i51</state>
                 </option>
             </data>
         </settings>
@@ -3887,7 +3887,7 @@
                 <option>
                     <name>Compiler Extra Options Edit</name>
                     <state>-f $PROJ_DIR$\..\..\..\Tools\CC2530DB\f8wRouter.cfg</state>
-                    <state>-f $PROJ_DIR$\..\..\..\Tools\CC2530DB\f8wConfig.cfg</state>
+                    <state>-f $PROJ_DIR$\..\zstack-lib\f8wConfig.cfg</state>
                     <state>-f $PROJ_DIR$\..\..\..\Tools\CC2530DB\f8wZCL.cfg</state>
                 </option>
                 <option>
@@ -5989,7 +5989,7 @@
                 </option>
                 <option>
                     <name>OGChipConfigPath</name>
-                    <state>$TOOLKIT_DIR$\config\devices\Texas Instruments\CC2530F256.i51</state>
+                    <state>$TOOLKIT_DIR$\config\devices\Texas Instruments\CC25xx\3x\CC2530F256.i51</state>
                 </option>
             </data>
         </settings>
@@ -6174,7 +6174,7 @@
                 <option>
                     <name>Compiler Extra Options Edit</name>
                     <state>-f $PROJ_DIR$\..\..\..\Tools\CC2530DB\f8wRouter.cfg</state>
-                    <state>-f $PROJ_DIR$\..\..\..\Tools\CC2530DB\f8wConfig.cfg</state>
+                    <state>-f $PROJ_DIR$\..\zstack-lib\f8wConfig.cfg</state>
                     <state>-f $PROJ_DIR$\..\..\..\Tools\CC2530DB\f8wZCL.cfg</state>
                 </option>
                 <option>
@@ -8276,7 +8276,7 @@
                 </option>
                 <option>
                     <name>OGChipConfigPath</name>
-                    <state>$TOOLKIT_DIR$\config\devices\Texas Instruments\CC2530F256.i51</state>
+                    <state>$TOOLKIT_DIR$\config\devices\Texas Instruments\CC25xx\3x\CC2530F256.i51</state>
                 </option>
             </data>
         </settings>
@@ -8461,7 +8461,7 @@
                 <option>
                     <name>Compiler Extra Options Edit</name>
                     <state>-f $PROJ_DIR$\..\..\..\Tools\CC2530DB\f8wRouter.cfg</state>
-                    <state>-f $PROJ_DIR$\..\..\..\Tools\CC2530DB\f8wConfig.cfg</state>
+                    <state>-f $PROJ_DIR$\..\zstack-lib\f8wConfig.cfg</state>
                     <state>-f $PROJ_DIR$\..\..\..\Tools\CC2530DB\f8wZCL.cfg</state>
                 </option>
                 <option>
@@ -9687,7 +9687,7 @@
             <name>$PROJ_DIR$\..\..\..\Tools\CC2530DB\f8w2530.xcl</name>
         </file>
         <file>
-            <name>$PROJ_DIR$\..\..\..\Tools\CC2530DB\f8wConfig.cfg</name>
+            <name>$PROJ_DIR$\..\zstack-lib\f8wConfig.cfg</name>
         </file>
         <file>
             <name>$PROJ_DIR$\..\..\..\Tools\CC2530DB\f8wCoord.cfg</name>

CC2530DB/GenericApp.eww

@@ -10,25 +10,25 @@
                 <project>GenericApp</project>
                 <configuration>Zintercom_Router</configuration>
             </member>
+            <member>
+                <project>GenericApp</project>
+                <configuration>Zintercom_Router_PA1</configuration>
+            </member>
+            <member>
+                <project>GenericApp</project>
+                <configuration>Zintercom_Router_PA2</configuration>
+            </member>
             <member>
                 <project>GenericApp</project>
                 <configuration>Zintercom_EndDevice</configuration>
             </member>
             <member>
                 <project>GenericApp</project>
-                <configuration>Zintercom_Router_CC2592</configuration>
+                <configuration>Zintercom_EndDevice_PA1</configuration>
             </member>
             <member>
                 <project>GenericApp</project>
-                <configuration>Zintercom_EndDevice_CC2592</configuration>
+                <configuration>Zintercom_EndDevice_PA2</configuration>
-            </member>
-            <member>
-                <project>GenericApp</project>
-                <configuration>Zintercom_Router_CC2591</configuration>
-            </member>
-            <member>
-                <project>GenericApp</project>
-                <configuration>Zintercom_EndDevice_CC2591</configuration>
             </member>
         </batchDefinition>
     </batchBuild>

README.md

@@ -1,45 +1,122 @@
 # Zintercom
-## Zigbee Intercom Automator
+
+## How to compile
+Follow this article https://zigdevwiki.github.io/Begin/IAR_install/
+
+##### Zigbee Intercom Automator  
+This device is designed to control the matrix intercom using Zigbee.
+
+Using zigbee2mqtt you can:
+1. Receive a notification when the intercom rings. (also support **direct bind**)
+2. Mute the sound on the intercom handset.
+3. Automatically or manually open the door or hang up when the intercom rings.
+
+There are 4 work modes:  
+1. `Never` - ordinary work mode, use a handset to control  
+2. `Once` - one-time open door when intercom rings  
+3. `Always` - open door when intercom rings  
+4. `Drop` - hangs up all intercom rings, right after the start  
+
+You can change the operating mode using z2m or by short press the button. (< 1000ms)  
+After pressing the button, the LED will flash at 4 Hz. 
+The number of flashes indicates the current operating mode.  
+
+You can control sound mode using z2m or by long-press the button. (1000ms < X < 5000ms)  
+After pressing the button, the LED will flash at 1.5 Hz.  
+One flash - OFF, two flashes - ON.  
+
+  
+  
+## Important info
+#### 1
+In Gerber PCB v1.0 committed on Apr 14, there are some errors in the silkscreen layers:
+1. 'Line-' and 'Phone-' are reversed.
+2. '+' and '-' are also reversed.  
+
+Just plug by swapping.  
+  
+#### 2
+The problem of cross-calls to other apartments:  
+it was revealed that the intercom circuit is closed through the reverse diode of the u2 transistor (thanks to @Alex_AW)  
+to prevent it, you need to add a diode according to the diagram:  
+![](/images/fix_error_rings.png)  
+
+#### 3
+If you want to use the battery version without a handset, do not turn off the sound in z2m, but use an external resistor to emulate the intercom handset, according to the diagram:  
+![](/images/battery_no_handset.png)    
+   
    
 ### How to join
-Reset to FN by reboot device 5 times with interval less than 10 seconds.  
+Reset to FN by reboot the device 5 times with intervals of less than 10 seconds.  
-Reset to FN by press and hold BTN for 5 seconds.  
+Reset to FN by pressing and holding BTN for 5 seconds.  
 
 LED will flash during reset.  
 
+![](/images/z2m_dashboard.gif)  
+
 
 ### How to add device into zigbe2mqtt
 Use [external converters](https://www.zigbee2mqtt.io/information/configuration.html#external-converters-configuration) feature
 
-Converter file located [here](./converters/DIY_Zintercom.js)  
+Converter file located [here](https://github.com/diyruz/Zintercom/blob/master/converters/DIYRuZ_Zintercom.js)  
 
-<img src="./images/z2m_dashboard.png" width="45%">
+![](/images/z2m_exposes.png)  
-
-<img src="./images/z2m_exposes.png" width="90%">
 
 ### Schematic
 
-<img src="./hardware/Schematic_Zintercom.png" width="90%">
+![](/hardware/Schematic_Zintercom.png)  
 
 
 ### PCB size  
 
 `57.5mm x 27.3mm`  
-<img src="./images/dimensions.png" width="60%">
+![](/images/dimensions.png)  
 
 
 ### DC Power  
 
+5-10 V  
+  
 Support `router` and `end device` modes.  
 Install `E18-MS1PA1`, `E18-MS1PA2` or `E18-MS1-PCB`.   
-<img src="./images/front_side.png" width="70%">
+
-<img src="./images/back_DC_5-9V.png" width="35%">
+![](/images/front_side.png)  
-<img src="./images/back_microUSB.png" width="35%">
+
+![](/images/back_DC_5-9V.png)  
 
 
 ### Battery Power  
 
+2 * AAA batteries  
+  
 Support only `end device` mode.  
 Install `E18-MS1-PCB` only!  
-<img src="./images/back_2xAAA.png" width="35%">
+
-<img src="./images/back_CR2032.png" width="35%">
+Do not turn off `sound` because it turns U2 forever, which will drain the battery much faster.
+
+Since the device is in sleep mode, it cannot receive commands.  
+But you can set the button mode or at the time of the call.  
+
+If any commands are in the coordinator's queue, they will be executed after a button is pressed or a call is received.
+
+![](/images/back_2xAAA.png)  
+
+##### The mode set by the Zigbee command `overwrites` the mode set by the button.
+
+### Binding
+The device supports the direct binding of an incoming call to the onOff cluster.  
+
+For example, you can turn on the light while a call comes to the intercom, for notification in mute mode.
+
+
+### Files to reproduce
+* [Gerbers and BOM](https://github.com/diyruz/Zintercom/tree/master/hardware) by [xyzroe](https://t.me/xyzroe)  
+* [Firmware](https://github.com/diyruz/Zintercom/releases) by [xyzroe](https://t.me/xyzroe)  
+* [Case stl](https://www.thingiverse.com/thing:4866356) by [dreamertwo](https://t.me/dreamertwo) 
+
+![](https://cdn.thingiverse.com/assets/0b/2f/09/d3/37/large_display_2021-05-22_22-55-43.JPG)
+
+### Inspired by
+The original scheme of the intercom opener by [Alexander Vaidurov](https://easyeda.com/Alex_AW/domofon-with-battery)  
+Various hardware solutions by [Jager](https://modkam.ru)  
+Firmware for different Zigbee devices by [Anonymous](https://github.com/nurikk/)  

Source/hal_board_cfg.h

@@ -242,15 +242,15 @@ extern void MAC_RfFrontendSetup(void);
   P1DIR |= BV(0) | BV(1);                                        \
                                                                  \
   /* Set PA/LNA HGM control P0_7 */                              \
-  P0DIR |= BV(7);                                              \
+  P0DIR |= BV(7);                                                \
                                                                  \
                                                                  \
   /* setup RF frontend if necessary */                           \
   HAL_BOARD_RF_FRONTEND_SETUP();                                 \
   LED1_DDR |= LED1_BV;                                           \
   LED2_DDR |= LED2_BV;                                           \
-  LED3_DDR |= LED3_BV;    
+  LED3_DDR |= LED3_BV;                                           \
-  LED4_DDR |= LED4_BV; \
+  LED4_DDR |= LED4_BV;                                           \
 }
 
 #elif defined (HAL_PA_LNA_CC2592) || defined (HAL_PA_LNA_SE2431L)

Source/preinclude.h

@@ -42,20 +42,29 @@
 #endif
 
 #if defined( HAL_BOARD_TARGET )
+    // Income ring - P0_0
+    #define KEY_INCOME_PORT HAL_KEY_PORT0
     #define HAL_KEY_P0_INPUT_PINS BV(0)
     #define HAL_KEY_P0_INPUT_PINS_EDGE HAL_KEY_RISING_EDGE
+    // Button - P2_0
+    #define KEY1_PORT HAL_KEY_PORT2
     #define HAL_KEY_P2_INPUT_PINS BV(0)
     #define HAL_KEY_P2_INPUT_PINS_EDGE HAL_KEY_FALLING_EDGE
-    #define INT_HEAP_LEN 2256
+    #define INT_HEAP_LEN 2200//2256
 #elif defined( HAL_BOARD_CHDTECH_DEV )
+    // Income ring - P0_1
+    #define KEY_INCOME_PORT HAL_KEY_PORT0
     #define HAL_KEY_P0_INPUT_PINS BV(1)
     #define HAL_KEY_P0_INPUT_PINS_EDGE HAL_KEY_FALLING_EDGE
+    // Button - P2_0
+    #define KEY1_PORT HAL_KEY_PORT2
     #define HAL_KEY_P2_INPUT_PINS BV(0)
     #define HAL_KEY_P2_INPUT_PINS_EDGE HAL_KEY_FALLING_EDGE
     #define DO_DEBUG_UART
     #define INT_HEAP_LEN 2060
 #endif
 
+#define BTN_HOLD_TIME 1000
 #define FACTORY_RESET_HOLD_TIME_LONG 5000
 
 #if defined( DO_DEBUG_UART )

Source/zcl_app.c

@@ -68,6 +68,7 @@ byte zclApp_TaskID;
  * LOCAL VARIABLES
  */
 
+static uint8 currentBtnClickPhase = 0;
 
 /*********************************************************************
  * LOCAL FUNCTIONS
@@ -88,8 +89,6 @@ static void zclApp_RingRun(void);
 static void zclApp_TalkStart(void);
 static void zclApp_RingEnd(void);
 
-//static uint32 pressTime = 0;
-
 /*********************************************************************
  * ZCL General Profile Callback table
  */
@@ -123,6 +122,7 @@ void zclApp_Init(byte task_id) {
     LREP("Build %s \r\n", zclApp_DateCodeNT);
 
     zclApp_ConfigInit(TIMER_START);
+    
     IO_IMODE_PORT_PIN(0,0,IO_TRI);
         
     #if defined( ZIC_BATTERY_MODE )
@@ -136,38 +136,56 @@ static void zclApp_HandleKeys(byte portAndAction, byte keyCode) {
     //LREP("zclApp_HandleKeys portAndAction=0x%X keyCode=0x%X\r\n", portAndAction, keyCode);
     //zclCommissioning_HandleKeys(portAndAction, keyCode);
     
-    if (portAndAction & 0x01) { //P0 Ring //S1 P0_1
+    if (portAndAction & KEY_INCOME_PORT) { //P0 Ring //S1 P0_1  TODO add check Income pin
       
       //exit old stop timer
       osal_stop_timerEx(zclApp_TaskID, APP_RING_STOP_EVT);
-      osal_clear_event(zclApp_TaskID, APP_RING_STOP_EVT);
+      //osal_clear_event(zclApp_TaskID, APP_RING_STOP_EVT);
-      
+      //start new stop timer (ring ends timer)
+      //osal_start_timerEx(zclApp_TaskID, APP_RING_STOP_EVT, 3000);
+      //zclApp_Config.TimeRing
+      uint32 TimeBell = (uint32)zclApp_Config.TimeBell *(uint32)1000;
+      osal_start_timerEx(zclApp_TaskID, APP_RING_STOP_EVT, (uint32)TimeBell);
       if (portAndAction & HAL_KEY_PRESS) {
-          //osal_pwrmgr_task_state(zclApp_TaskID, PWRMGR_HOLD);
+
-          //osal_pwrmgr_task_state(Hal_TaskID, PWRMGR_CONSERVE);
+
         
           //start ring 
           if (zclApp_State.RingRunStep == 0) {
-            LREPMaster("Ring start\r\n");
+              #if defined( ZIC_BATTERY_MODE )
-            HalLedSet(LED_PIN, HAL_LED_MODE_BLINK);
+                osal_pwrmgr_task_state(zclApp_TaskID, PWRMGR_HOLD);
-            zclApp_State.RingRunStep = 1;
+              #endif    
-            osal_start_reload_timer(zclApp_TaskID, APP_RING_RUN_EVT, 500);
+              LREPMaster("Ring start\r\n");
-            afAddrType_t inderect_DstAddr = {.addrMode = (afAddrMode_t)AddrNotPresent, .endPoint = 0, .addr.shortAddr = 0};
+              //HalLedSet(LED_PIN, HAL_LED_MODE_BLINK);
-            zclGeneral_SendOnOff_CmdOn(zclApp_FirstEP.EndPoint, &inderect_DstAddr, FALSE, bdb_getZCLFrameCounter());
+              zclApp_State.RingRunStep = 1;
+              //osal_start_reload_timer(zclApp_TaskID, APP_RING_RUN_EVT, 500);
+              osal_start_timerEx(zclApp_TaskID, APP_RING_RUN_EVT, 500);
+              afAddrType_t inderect_DstAddr = {.addrMode = (afAddrMode_t)AddrNotPresent, .endPoint = 0, .addr.shortAddr = 0};
+              zclGeneral_SendOnOff_CmdOn(zclApp_FirstEP.EndPoint, &inderect_DstAddr, FALSE, bdb_getZCLFrameCounter());
           }
       }
       
-      //start new stop timer (ring ends timer)
-      osal_start_reload_timer(zclApp_TaskID, APP_RING_STOP_EVT, 3000);
     }
 
-    if (portAndAction & 0x04) { //P2 Btn //S2 P2_0
+    if (portAndAction & KEY1_PORT) { //P2 Btn //S2 P2_0  TODO add check BUTTON pin
       zclFactoryResetter_HandleKeys(portAndAction, keyCode);
       if (portAndAction & HAL_KEY_PRESS) {
         LREPMaster("Key pressed\r\n");
-        osal_start_reload_timer(zclApp_TaskID, APP_BTN_CLICK_EVT, 50);
+	zclApp_State.pressTime = osal_GetSystemClock();
+        LREP("pressTime = %ld\r\n", zclApp_State.pressTime);
+      }
+      if (portAndAction & HAL_KEY_RELEASE) {
+        LREPMaster("Key released\r\n");
+        uint32 holdTime = osal_GetSystemClock() - zclApp_State.pressTime;
+        LREP("holdTime = %ld \r\n", holdTime);
+        if (zclApp_State.pressTime != 0 && holdTime >= BTN_HOLD_TIME) { // check release without press and hold milliseconds
+          osal_start_timerEx(zclApp_TaskID, APP_BTN_HOLD_EVT, 50);
+        }
+        else {
+          osal_start_timerEx(zclApp_TaskID, APP_BTN_CLICK_EVT, 50);
+        }
+        zclApp_State.pressTime = 0;
       }
-
     }
 }
 
@@ -240,7 +258,9 @@ uint16 zclApp_event_loop(uint8 task_id, uint16 events) {
     
     if (events & APP_BTN_HOLD_EVT) {
         LREPMaster("APP_BTN_HOLD_EVT\r\n");
-        zclApp_BtnClick(true);
+        #if !defined( ZIC_BATTERY_MODE )
+          zclApp_BtnClick(true);
+        #endif   
         return (events ^ APP_BTN_HOLD_EVT);
     }
     return 0;
@@ -248,10 +268,13 @@ uint16 zclApp_event_loop(uint8 task_id, uint16 events) {
 
 
 static void zclApp_RingRun(void) {
-  
     zclApp_State.RingRunStep++;
     LREP("zclApp_State.RingRunStep %d\r\n", zclApp_State.RingRunStep);
     LREP("zclApp_State.State %d\r\n", zclApp_State.State);
+    
+    osal_start_timerEx(zclApp_TaskID, APP_RING_RUN_EVT, 500);
+    
+    
     switch (zclApp_State.State) {
     case Idle:
         zclApp_State.State = Ring;
@@ -270,6 +293,7 @@ static void zclApp_RingRun(void) {
         }
         break; 
     case Talk:
+        osal_stop_timerEx(zclApp_TaskID, APP_RING_STOP_EVT);
         if ((zclApp_Config.ModeOpen == Once) || (zclApp_Config.ModeOpen == Always)){
             if (zclApp_State.RingRunStep > ((zclApp_Config.TimeRing + zclApp_Config.TimeTalk) * 2)) {
                 zclApp_State.State = Open;
@@ -279,6 +303,7 @@ static void zclApp_RingRun(void) {
         }
         break; 
     case Open:
+        osal_stop_timerEx(zclApp_TaskID, APP_RING_STOP_EVT);
         if ((zclApp_Config.ModeOpen == Once) || (zclApp_Config.ModeOpen == Always)){
             if (zclApp_State.RingRunStep > ((zclApp_Config.TimeRing + zclApp_Config.TimeTalk + zclApp_Config.TimeOpen) * 2)) {
                 zclApp_RingEnd();
@@ -286,7 +311,8 @@ static void zclApp_RingRun(void) {
         }
         break; 
     case Droped:
-        if (zclApp_State.RingRunStep > 3) {
+        osal_stop_timerEx(zclApp_TaskID, APP_RING_STOP_EVT);
+        if (zclApp_State.RingRunStep > 1) {
             zclApp_RingEnd();
         }     
         break; 
@@ -296,8 +322,8 @@ static void zclApp_RingRun(void) {
 
 static void zclApp_TalkStart(void) {
     LREPMaster("Talk start\r\n");
-    osal_stop_timerEx(zclApp_TaskID, APP_RING_STOP_EVT);
+    //osal_stop_timerEx(zclApp_TaskID, APP_RING_STOP_EVT);
-    osal_clear_event(zclApp_TaskID, APP_RING_STOP_EVT);
+    //osal_clear_event(zclApp_TaskID, APP_RING_STOP_EVT);
     zclApp_OneReport();
     HalLedSet(ANSWER_PIN, HAL_LED_MODE_ON);
     if (zclApp_Config.ModeSound == true) {
@@ -310,41 +336,37 @@ static void zclApp_TalkStart(void) {
 
 static void zclApp_RingEnd(void) {
     LREPMaster("Ring end\r\n");
-    if (zclApp_Config.ModeSound == true) {
+    HalLedSet(CATCH_PIN, !zclApp_Config.ModeSound);
-        HalLedSet(CATCH_PIN, HAL_LED_MODE_OFF);
+    HalLedSet(HANDSET_PIN, !zclApp_Config.ModeSound);
-        HalLedSet(HANDSET_PIN, HAL_LED_MODE_OFF);
-    }
-    else {
-        HalLedSet(CATCH_PIN, HAL_LED_MODE_ON);
-        HalLedSet(HANDSET_PIN, HAL_LED_MODE_ON);
-    }
     HalLedSet(ANSWER_PIN, HAL_LED_MODE_OFF);
     osal_stop_timerEx(zclApp_TaskID, APP_RING_RUN_EVT);
-    osal_clear_event(zclApp_TaskID, APP_RING_RUN_EVT);
+    //osal_clear_event(zclApp_TaskID, APP_RING_RUN_EVT);
-    osal_stop_timerEx(zclApp_TaskID, APP_RING_STOP_EVT);
+    //osal_stop_timerEx(zclApp_TaskID, APP_RING_STOP_EVT);
-    osal_clear_event(zclApp_TaskID, APP_RING_STOP_EVT);
+    //osal_clear_event(zclApp_TaskID, APP_RING_STOP_EVT);
     zclApp_State.RingRunStep = 0;
     zclApp_State.State = Idle;
-    afAddrType_t inderect_DstAddr = {.addrMode = (afAddrMode_t)AddrNotPresent, .endPoint = 0, .addr.shortAddr = 0};
     
+    afAddrType_t inderect_DstAddr = {.addrMode = (afAddrMode_t)AddrNotPresent, .endPoint = 0, .addr.shortAddr = 0};  
     zclGeneral_SendOnOff_CmdOff(zclApp_FirstEP.EndPoint, &inderect_DstAddr, FALSE, bdb_getZCLFrameCounter());
+    
     if (zclApp_Config.ModeOpen == Once) {
         zclApp_Config.ModeOpen = Never;
     }
     zclApp_OneReport(); 
+    
     #if defined( ZIC_BATTERY_MODE )
       zclBattery_Report();
+      osal_pwrmgr_task_state(zclApp_TaskID, PWRMGR_CONSERVE);
     #endif    
 }
 
 static void zclApp_BtnClick(bool hold) {
-    
-    static uint8 currentBtnClickPhase = 0;
     LREP("currentBtnClickPhase %d\r\n", currentBtnClickPhase);
     switch (currentBtnClickPhase++) {
     case 0:
         if (hold) {
             zclApp_Config.ModeSound = !zclApp_Config.ModeSound;
+            HalLedSet(HANDSET_PIN, !zclApp_Config.ModeSound);
             HalLedSet(CATCH_PIN, !zclApp_Config.ModeSound);    
         }
         else {
@@ -367,7 +389,8 @@ static void zclApp_BtnClick(bool hold) {
             HalLedBlink(LED_PIN, zclApp_Config.ModeOpen+1, 50, 250);
         }
         break;
-    case 3:
+    default:
+        /*
         if (hold) {
             osal_stop_timerEx(zclApp_TaskID, APP_BTN_HOLD_EVT);
             osal_clear_event(zclApp_TaskID, APP_BTN_HOLD_EVT);
@@ -376,12 +399,18 @@ static void zclApp_BtnClick(bool hold) {
             osal_stop_timerEx(zclApp_TaskID, APP_BTN_CLICK_EVT);
             osal_clear_event(zclApp_TaskID, APP_BTN_CLICK_EVT);
         }
+        */
         currentBtnClickPhase = 0;
         break;
     }
-    #if defined( ZIC_BATTERY_MODE )
+    if (currentBtnClickPhase != 0) {
-    zclBattery_Report();
+      if (hold) {
-    #endif
+        osal_start_timerEx(zclApp_TaskID, APP_BTN_HOLD_EVT, 50);
+      }
+      else {
+        osal_start_timerEx(zclApp_TaskID, APP_BTN_CLICK_EVT, 50);
+      }
+    }
 }
 
 static void zclApp_Report(void) {
@@ -392,7 +421,10 @@ static void zclApp_OneReport(void) {
     HalLedSet(LED_PIN, HAL_LED_MODE_BLINK);
     bdb_RepChangedAttrValue(zclApp_FirstEP.EndPoint, ZCL_INTERCOM, ATTRID_STATE);
     bdb_RepChangedAttrValue(zclApp_FirstEP.EndPoint, ZCL_INTERCOM, ATTRID_MODEOPEN);
-    bdb_RepChangedAttrValue(zclApp_FirstEP.EndPoint, ZCL_INTERCOM, ATTRID_MODESOUND);
+    #if !defined( ZIC_BATTERY_MODE )
+      bdb_RepChangedAttrValue(zclApp_FirstEP.EndPoint, ZCL_INTERCOM, ATTRID_MODESOUND);
+    #endif    
+    
 }
 
 static void zclApp_BasicResetCB(void) {
@@ -422,14 +454,8 @@ static void zclApp_ConfigInit(bool restart) {
     LREP("Start report with interval %d seconds\r\n", ReportInterval);
     osal_start_reload_timer(zclApp_TaskID, APP_REPORT_EVT, ((uint32)ReportInterval*(uint32)1000));
  
-    if (zclApp_Config.ModeSound == true) {
+    HalLedSet(HANDSET_PIN, !zclApp_Config.ModeSound);
-        HalLedSet(HANDSET_PIN, HAL_LED_MODE_OFF);
+    HalLedSet(CATCH_PIN, !zclApp_Config.ModeSound);
-        HalLedSet(CATCH_PIN, HAL_LED_MODE_OFF);
-    }
-    else {
-        HalLedSet(HANDSET_PIN, HAL_LED_MODE_ON);
-        HalLedSet(CATCH_PIN, HAL_LED_MODE_ON);
-    }
     HalLedSet(ANSWER_PIN, HAL_LED_MODE_OFF);
 }
 

Source/zcl_app.h

@@ -21,9 +21,9 @@ extern "C" {
 #define APP_SAVE_ATTRS_EVT 0x0002
 #define APP_BTN_CLICK_EVT 0x0004
 #define APP_RING_RUN_EVT 0x0008
-#define APP_BTN_HOLD_EVT 0x0016
+#define APP_BTN_HOLD_EVT 0x0010
-#define APP_RING_STOP_EVT 0x0032
+#define APP_RING_STOP_EVT 0x0020
-#define APP_TALK_START_EVT 0x0064
+#define APP_TALK_START_EVT 0x0040
   
 /*********************************************************************
  * MACROS
@@ -53,6 +53,7 @@ extern "C" {
 #define ATTRID_TIMERING             0x0053                                  
 #define ATTRID_TIMETALK             0x0054
 #define ATTRID_TIMEOPEN             0x0055
+#define ATTRID_TIMEBELL             0x0057
 #define ATTRID_TIMEREPORT           0x0056
 
 #define LED_PIN         HAL_LED_1
@@ -107,6 +108,7 @@ typedef struct {
     uint8 TimeRing;
     uint8 TimeTalk;
     uint8 TimeOpen;
+    uint8 TimeBell;
     uint8 TimeReport;
 } application_config_t;
 

Source/zcl_app_data.c

@@ -64,10 +64,10 @@ const uint8 zclApp_PowerSource = POWER_SOURCE_DC;
 #define DEFAULT_ModeOpen       Never 
 #define DEFAULT_ModeSound      TRUE 
 
-#define DEFAULT_TimeRing       3 //seconds to ring, before answer
+#define DEFAULT_TimeRing       7 //seconds to ring, before answer
-#define DEFAULT_TimeTalk       1 //seconds to talk, before open
+#define DEFAULT_TimeTalk       3 //seconds to talk, before open
 #define DEFAULT_TimeOpen       2 //seconds to hold open
-
+#define DEFAULT_TimeBell       3 //seconds after last bell to finish ring
 
 application_config_t zclApp_Config = {
     .ModeOpen = DEFAULT_ModeOpen,
@@ -75,12 +75,14 @@ application_config_t zclApp_Config = {
     .TimeRing = DEFAULT_TimeRing,
     .TimeTalk = DEFAULT_TimeTalk,
     .TimeOpen = DEFAULT_TimeOpen,
+    .TimeBell = DEFAULT_TimeBell,
     .TimeReport = DEFAULT_TimeReport,
 };
 
 device_state_t zclApp_State = {
     .State = Idle,
     .RingRunStep = 0,
+    .pressTime = 0,
 };
 
 
@@ -121,6 +123,7 @@ CONST zclAttrRec_t zclApp_AttrsFirstEP[] = {
     {ZCL_INTERCOM, {ATTRID_TIMERING, ZCL_UINT8, RW, (void *)&zclApp_Config.TimeRing}},
     {ZCL_INTERCOM, {ATTRID_TIMETALK, ZCL_UINT8, RW, (void *)&zclApp_Config.TimeTalk}},
     {ZCL_INTERCOM, {ATTRID_TIMEOPEN, ZCL_UINT8, RW, (void *)&zclApp_Config.TimeOpen}},
+    {ZCL_INTERCOM, {ATTRID_TIMEBELL, ZCL_UINT8, RW, (void *)&zclApp_Config.TimeBell}},
     {ZCL_INTERCOM, {ATTRID_TIMEREPORT, ZCL_UINT8, RW, (void *)&zclApp_Config.TimeReport}},
 };
 
@@ -156,5 +159,6 @@ void zclApp_ResetAttributesToDefaultValues(void) {
     zclApp_Config.TimeRing = DEFAULT_TimeRing;
     zclApp_Config.TimeTalk = DEFAULT_TimeTalk;
     zclApp_Config.TimeOpen  = DEFAULT_TimeOpen;
+    zclApp_Config.TimeBell  = DEFAULT_TimeBell;
     zclApp_Config.TimeReport  = DEFAULT_TimeReport;
 }

converters/DIYRuZ_Zintercom.js

@@ -7,11 +7,6 @@ const {
 const ep = exposes.presets;
 const ea = exposes.access;
 
-const ZCL_DATATYPE_INT16 = 0x29;
-const ZCL_DATATYPE_UINT8 = 0x20;
-const ZCL_DATATYPE_UINT16 = 0x21;
-const ZCL_DATATYPE_BOOLEAN = 0x10;
-const ZCL_DATATYPE_INT32 = 0x2b;
 const bind = async (endpoint, target, clusters) => {
     for (const cluster of clusters) {
         await endpoint.bind(cluster, target);
@@ -63,8 +58,6 @@ const repInterval = {
     MINUTE: 60,
 };
 
-
-
 const fz = {
   diy_zintercom_config: {
       cluster: 'closuresDoorLock',
@@ -89,6 +82,9 @@ const fz = {
           if (msg.data.hasOwnProperty(0x0055)) {
               result.time_open = msg.data[0x0055];
           }
+          if (msg.data.hasOwnProperty(0x0057)) {
+              result.time_bell = msg.data[0x0057];
+          }
           if (msg.data.hasOwnProperty(0x0056)) {
               result.time_report = msg.data[0x0056];
           }
@@ -99,7 +95,7 @@ const fz = {
 
 const tz = {
   diy_zintercom_config: {
-      key: ['state', 'mode', 'sound', 'time_ring', 'time_talk', 'time_open', 'time_report'],
+      key: ['state', 'mode', 'sound', 'time_ring', 'time_talk', 'time_open', 'time_bell', 'time_report'],
       convertSet: async (entity, key, rawValue, meta) => {
           const lookup = {
               'OFF': 0x00,
@@ -125,6 +121,7 @@ const tz = {
               time_ring: {0x0053: {value, type: 0x20}},
               time_talk: {0x0054: {value, type: 0x20}},
               time_open: {0x0055: {value, type: 0x20}},
+              time_bell: {0x0057: {value, type: 0x20}},
               time_report: {0x0056: {value, type: 0x20}},
           };
 
@@ -141,6 +138,7 @@ const tz = {
               time_ring: ['closuresDoorLock', 0x0053],
               time_talk: ['closuresDoorLock', 0x0054],
               time_open: ['closuresDoorLock', 0x0055],
+              time_bell: ['closuresDoorLock', 0x0057],
               time_report: ['closuresDoorLock', 0x0056],
           };
           await entity.read(payloads[key][0], [payloads[key][1]]);
@@ -150,11 +148,10 @@ const tz = {
 
 const device = {
     zigbeeModel: ['DIY_Zintercom'],
-    model: 'DIY_Zintercom',
+    model: 'DIYRuZ_Zintercom',
-    vendor: 'xyzroe',
+    vendor: 'DIYRuZ',
-    description: '[Intercom Auto Opener]',
+    description: '[Matrix intercom auto opener](https://diyruz.github.io/posts/zintercom/)',
-    supports: '',
+    icon: 'https://raw.githubusercontent.com/diyruz/Zintercom/master/images/z2m.png',
-    //homeassistant: [hass.temperature, hass.presure, hass.humidity, hass.co2],
     fromZigbee: [
         fromZigbeeConverters.battery,
         fz.diy_zintercom_config,
@@ -169,37 +166,11 @@ const device = {
     configure: async (device, coordinatorEndpoint) => {
         const firstEndpoint = device.getEndpoint(1);
 
-        //await bind(firstEndpoint, coordinatorEndpoint, ['msCO2', 'closuresDoorLock', 'genOnOff']);
-
         await bind(firstEndpoint, coordinatorEndpoint, ['closuresDoorLock', 'genPowerCfg']);
+
         const overides = {min: 0, max: 3600, change: 0};
         await configureReporting.batteryVoltage(firstEndpoint, overides);
         await configureReporting.batteryPercentageRemaining(firstEndpoint, overides);
-/*
-        if (device.applicationVersion < 3) { // Legacy PM2 firmwares
-            const payload = [{
-                attribute: 'batteryPercentageRemaining',
-                minimumReportInterval: 0,
-                maximumReportInterval: 3600,
-                reportableChange: 0,
-            }, {
-                attribute: 'batteryVoltage',
-                minimumReportInterval: 0,
-                maximumReportInterval: 3600,
-                reportableChange: 0,
-            }];
-            await firstEndpoint.configureReporting('genPowerCfg', payload);
-        }
-        */
-/*
-        const msBindPayload = [{
-            attribute: 'measuredValue',
-            minimumReportInterval: 0,
-            maximumReportInterval: 3600,
-            reportableChange: 0,
-        }];
-        await firstEndpoint.configureReporting('msCO2', msBindPayload);
-*/
 
         const payload = [{
             attribute: {
@@ -212,20 +183,6 @@ const device = {
           },
         ];
         await firstEndpoint.configureReporting('closuresDoorLock', payload);
-        /**/
-        /*
-        await firstEndpoint.configureReporting('msTemperatureMeasurement', msBindPayload);
-        await firstEndpoint.configureReporting('msRelativeHumidity', msBindPayload);
-
-        const pressureBindPayload = [{
-            attribute: 'scaledValue',
-            minimumReportInterval: 0,
-            maximumReportInterval: 3600,
-            reportableChange: 0,
-        }];
-        await firstEndpoint.configureReporting('msPressureMeasurement', pressureBindPayload);
-        */
-
 
     },
     exposes: [
@@ -241,10 +198,11 @@ const device = {
             .withDescription('Time to hold before open'),
         exposes.numeric('time_open', ea.ALL).withUnit('sec')
             .withDescription('Time to open before end'),
+        exposes.numeric('time_bell', ea.ALL).withUnit('sec')
+            .withDescription('Time after last bell to finish ring'),
         exposes.numeric('time_report', ea.ALL).withUnit('min')
             .withDescription('Reporting interval'),
         ep.battery(),
-        ep.linkquality(),
     ],
 };